Q235B Steel Conical Head corrosion resistance and high-temperature strength
316L oval head Q235B conical head 304 stainless steel pipe cap 20# carbon steel plug
PRODUCT DETELS
-
316L Oval Head:
- A 316L oval head refers to a head or cap with an oval shape made from stainless steel grade 316L.
- Stainless steel 316L is a low-carbon variation of stainless steel 316, known for its excellent corrosion resistance and high-temperature strength.
- Oval heads are used in various applications, including pressure vessels, tanks, and other equipment where a specific shape is required.
-
Q235B Conical Head:
- A Q235B conical head refers to a conical head or cap made from Q235B carbon steel.
- Q235B is a commonly used low-carbon steel in structural applications due to its good mechanical properties and affordability.
- Conical heads made from Q235B carbon steel are suitable for applications where carbon steel is preferred or required.
-
304 Stainless Steel Pipe Cap:
- A 304 stainless steel pipe cap is a cap or head used to seal the end of a pipe made from stainless steel grade 304.
- Stainless steel 304 is a widely used austenitic stainless steel known for its excellent corrosion resistance, durability, and versatility.
- Pipe caps made from stainless steel 304 are commonly used to provide closure and protection to the end of pipes.
-
20# Carbon Steel Plug:
- A 20# carbon steel plug refers to a plug made from carbon steel grade 20#.
- Carbon steel grade 20# is a common medium-carbon steel with good weldability and machinability.
- Carbon steel plugs are used to seal or close openings in various applications, such as pipes, tanks, or equipment.
When selecting or specifying these components, it is essential to consider factors such as material compatibility, dimensional requirements, pressure ratings, and compliance with relevant codes and standards. Consulting with engineers, industry specialists, or reputable manufacturers can help ensure the proper selection and design of these components for your specific application and requirements.
Order information:
- Pls provide us with below information
- Material grade. Including special requirement if have
- Head Diameter
- Nom THK or min thick
- Straight Flange if have
- others special forming process
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical, petrochemical, water treatment equipment and light industry equipment. The company can also undertake the processing of incoming drawings and samples according to customer requirements, and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: |
Such as oil, chemical industry, water conservancy, electric power, |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments; 2. Sand / Shot Blasting after Heat Treatment; 3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming; 2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination; 2. Ultrasonic Testing; 3. 100% Radiography Testing of weld seams; 4. Magnet Particle Examination; 5. Inspection under various Third party Inspection Agencies 6. NDT( after forming): DPT, RT, MPI, UT; 7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.