Heavy Wall Flame Retardant Heat-Shrinkable Tubing Adhesive Lined Cross linked Polyolefin
Heavy Wall Flame Retardant Heat-Shrinkable Tubing Adhesive-Lined Cross-linked Polyolefin
Product Description:
Adhesive-lined heavy wall heat shrinkable tubing is produced by high quality polyolefin and hot melt adhesive through doublelayer co-extrusion process. The outer layer of this tube has high physical and chemical properties, and good contraction, and so on.
Adhesive-lined heavy wall heat shrink tubing insulates and protects electrical splice and terminations where maximum flame retardancy and exceptional insulating and sealing characteristics are required.Features:
- 3:1 shrink ratio
- Excellent waterproof, moisture proof , sealing and insulating performance
- Flame Retardant
- Anti-UV light
- Will not split or rupture during installation, when overheated
- Continuous operating temperature: -45℃ to 125℃
- Fully shrink temperature: 125℃
- Thermoplastic adhesive liner for complete environmental protection and insulation
- Standard color: Black
10.Environmental standards: RoHS
11. Withstands severe mechanical requirements
12. Rated for 600V,90℃,continuous use
Applications:
Dimensions:
| Size | Expanded(mm) | After Recovery(mm) | Standard Package | |||
| mm | Inter Diameter | Inter Diameter | Jacket Thickness | Adhesive Thickness | Total Wall Thickness | (M/pc) |
| 9.0/3.0 | ≥9.0 | ≤3.0 | 2.0±0.20 | 0.35±0.10 | 2.30±0.25 | 1.22 |
| 13.0/4.0 | ≥13.0 | ≤4.0 | 2.4±0.20 | 0.35±0.10 | 2.75±0.25 | 1.22 |
| 20.0/6.0 | ≥20.0 | ≤6.0 | 2.5±0.20 | 0.40±0.10 | 2.90±0.25 | 1.22 |
| 28.0/9.0 | ≥28.0 | ≤9.0 | 2.5±0.20 | 0.40±0.10 | 2.90±0.25 | 1.22 |
| 33.0/10.2 | ≥33.0 | ≤10.2 | 3.2±0.25 | 0.40±0.10 | 3.60±0.25 | 1.22 |
| 38.1/12.0 | ≥38.1 | ≤12.0 | 3.4±0.20 | 0.60±0.15 | 4.00±0.35 | 1.22 |
| 43.2/12.7 | ≥43.2 | ≤12.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 51.0/16.0 | ≥55.0 | ≤16.0 | 4,3±0,20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 70.0/21.0 | ≥75.0 | ≤22.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 85.0/25.0 | ≥85.0 | ≤25.0 | 4.3±0.20 | 0.70±0.35 | 5.00±0.35 | 1.22 |
| 105.0/30.0 | ≥105.0 | ≤30.0 | 4.3±0.20 | 0.80±0.35 | 5.10±0.35 | 1.22 |
| 120.0/36.0 | ≥120.0 | ≤36.0 | 4.3±0.20 | 0.50±0.35 | 5.10±0.35 | 1.22 |
| 130.0/36.0 | ≥130.0 | ≤36.0 | 4.3±0.20 | 0.60±0.35 | 5.10±0.35 | 1.22 |
| 140.0/42.0 | ≥140.0 | ≤42.0 | 4.3±0.20 | 0.60±0.35 | 5.10±0.35 | 1.22 |
Technical Data:
| Property | Test Method | Stantard |
| Tensile Strength(Mpa) | ASTM D2671 | ≥10.4 |
| Elongation(%) | ASTM D2671 | ≥300 |
| Density(g/cm) | ASTM D792 | 1.2 |
| Longitudinal change(%) | UL224 | ≤±10 |
| Elongation after aging(%) | UL224 158℃X168hrs | ≥200 |
| Heat shock | UL224 225℃X4hrs | No cracking |
| Dielectric strength(kv/mm) | IEC 60243 | ≥20 |
| Volume resistivity(a·cm) | IEC 60093 | ≥1×10^14 |
| Water absorption(%) | ASTM-D570 | ≤0.5 |
Hot Melt Adhesive Property:
| Property | Test Method | Standard |
| Water Absorption | ASTM D570 | <0.2% |
| Sofening Point(℃) | ASTM E28 | 85 |
| Strength of pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D 1000 | 80N/25mm |
Shipping:
For international orders, we take necessary steps to comply with customs and import regulations to avoid any delays or additional charges for our customers. We also provide tracking information for our customers to keep them updated on the delivery status of their order.
FAQ:
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex, UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train. We will use good packing and ensure the safety. We will be responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock products in 3 work days.
If without stock,or stock is not enough, we will check the delivery time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have over 10 years OEM experience.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.