USB Dash Camera Taxi USB dual camera high - definition intelligent wide - angle

USB cameras are divided into two types :  safety free drivers and safety required drivers .  The usage is as follows : 
1 .  A USB camera with a security free driver can be used normally by connecting the camera to the USB interface on the back of the computer via a USB cable .

2 .  To install a USB camera driver   simply connect the camera to the USB port on the back of the computer via a USB cable   and then install the camera driver to use    The method of installing drivers is to download a software that automatically matches the hardware driver for the computer      After installation     the software will automatically detect the computer hardware driver program     and you can choose to solve it immediately

Connect the camera to the host :  Connect the USB camera to the USB interface of the Win7 host    and a hardware detection prompt sound will sound (in case of audio)      If there is a problem connecting to the host      it is recommended to restart the system and then reconnect to the host     If the connection still cannot be made    it may be a problem with the camera     It is recommended to replace the camera   2 .  Install camera driver :  You can search for and access the official website of the corresponding camera model in search engines     and download the latest driver for the corresponding model     Please check if the driver matches the system version before downloading   You can also download and install camera drivers through third - party driver management software    such as the official version of 360 Driver Master Network Card .  If it is a driver free camera, it can be used directly. 3. Open the relevant software to use: The camera driver can be installed and used. Taking QQ as an example    open and run the QQ software     open the 【 Main Menu 】  -  【 Settings 】    open the system settings    and move down under the basic settings to click 【 Audio Video Call 】    On the right side, you can see the camera screen     At the same time   you can also use the Win7 camera software. After installation     you can open the computer and see the Win7 camera icon 

The instruction manual for USB cameras comes with software download instructions    such as scanning QR codes for Android phones to download     and downloading corresponding phone app names directly from the app store for iOS Apple phones .  2 .  Start the camera and reset it first .  Press and hold the reset button    and after resetting    it can be configured     If it is a new machine    the reset step can be omitted .  3 .  Find the WiFi hotspot emitted by the USB camera machine and click connect .  Specific steps :  Open the phone settings    WiFi network   select the built -  in WiFi signal of the machine    and select Connect .  This network cannot access the internet    it is a hotspot signal that comes with the machine and is used to pair with the phone .  If your phone prompts that you cannot access the internet     do not choose to switch networks .  4 .  Open the downloaded app on your phone and you will automatically connect to the pre configured camera .

We are a professional manufacturer of research and development ,  production ,  and vehicle monitoring

Car video recorder ,  car camera ,  car usb camera ,  car display ,  usb camera

Please contact us by email : firecore1688@163.com