Low Voltage Inverter 380v 5.5kw 7.5kw Variable Frequency Drive 7hp 10hp
Factory Price Low Voltage Inverter 380v 5.5kw 7.5kw Variable Frequency Drive 7hp 10hp
Z2000 Series Inverter Features
Z2000 series vector type frequency converter, the following is a detailed introduction to its various characteristics:
Structure and Installation
Simple structure: The internal circuit design is concise, reducing unnecessary complex structures and components, lowering the probability of faults, and improving the reliability and stability of the frequency converter.
Small size: The compact design takes up less space, making it easy to install and layout in various devices, especially suitable for occasions with high installation space requirements.
Easy to install: It has multiple installation methods, such as wall mounted, embedded, etc., and the installation process is relatively simple, which can save installation time and cost.
Other functions
Instant stop and fast current limiting function: In the event of an instantaneous power outage, the frequency converter can maintain continuous operation for a short period of time through its own energy storage components or other technical means, avoiding equipment damage and production interruption caused by sudden motor stop. At the same time, the fast current limiting function can quickly limit the current size when there is an abnormal increase in current, prevent overcurrent faults from occurring, and reduce the probability of frequent fault alarms in the frequency converter.
Complete protection function: It has multiple protection functions such as output phase loss protection, overcurrent/overvoltage/overload/overheating protection, etc. It can monitor the operating status of the frequency converter and motor in real time. Once abnormal situations occur, timely protective measures will be taken, such as cutting off power, stopping operation, etc., to protect the safe operation of the equipment and reduce the risk of equipment damage.
Support for permanent magnet synchronous motor control: The Z2000T series supports permanent magnet synchronous motor control, which can fully utilize the advantages of high efficiency, energy saving, and high power density of permanent magnet synchronous motors, improve the performance and efficiency of the entire system, and is suitable for applications that require high control accuracy and efficiency
Inverter Technical Specification
| Item | Z2000 Inverter | |
| Standard Function | Control mode | Senseless flux vector control(SFVC) ; Voltage/Frequency (V/F) control |
| Maximum frequency | Vector control: 0-320Hz ; V/F control: 0-3200Hz | |
| Carrier frequency | 1-16kHz ; The carrier frequency is automatically adjusted based on the load features | |
| Input frequency solution | Digital setting: 0.01Hz ; Analog setting: maximum frequency x 0.025% | |
| Startup torque | G type: 0.5Hz/150%(SFVC) ; P type: 0.5Hz/100% | |
| Speed range | 1:100 | |
| Speed stability accuracy | ±0.5% | |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. P type: 60s for 120% of the rated current, 3s for 150% of the rated current. | |
| Torque boost | Auto boost ; Customized boost 0.1%-30.0% | |
| V/F curve | Line V/F curve; Multi-point V/F curve; N-power V/F curve | |
| V/F separation | Two types: complete separation; half separation | |
| Ramp mode | Straight-line ramp ; S-curve ramp ; Four groups of acceleration/deceleration time with the range of 0.0-6500.0s | |
| DC braking | DC braking frequency : 0.0Hz to maximum frequency Braking time: 0.0~100.0s Braking action current value: 0.0%~100.0% | |
| JOG control | JOG frequency range: 0.00~50.00Hz JOG acceleration/deceleration time: 0.0~6500.0s | |
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of X terminal states. | |
| Onboard PID | It realizes process-controlled closed loop control system easily | |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes. | |
| Auto voltage/ Over current stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current | |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive | |
| Torque limit and control | It can keep constant output voltage automatically when the mains voltage changes | |
VFD Inverter Specification
| Inverter Model | Rated Output Power(kW) | Rated Input Current(A) | Rated Output Current(A) | Motor Equipped(kW) |
| Input Voltage:1PH or 3PH AC 220V±15% | ||||
| Z2200-0R4G | 0.4 | 5.4 | 2.5 | 0.4 |
| Z2200-0R75G | 0.75 | 7.2 | 5 | 0.75 |
| Z2200-1R5G | 1.5 | 10 | 7 | 1.5 |
| Z2200-2R2G | 2.2 | 16 | 11 | 2.2 |
| Z2200-3R7G | 3.7 | 23 | 16.5 | 3.7 |
| Z2200-5R5G | 5.5 | 21 | 25 | 5.5 |
| Z2200-7R5G | 7.5 | 31 | 32 | 7.5 |
| Input Voltage:3PH AC 380V±15% | ||||
| Z2400-0R75G | 0.75 | 3.8 | 2.5 | 0.75 |
| Z2400-1R5G | 1.5 | 5 | 3.7 | 1.5 |
| Z2400-2R2G | 2.2 | 5.8 | 5 | 2.2 |
| Z2400-3R7G/5R5P | 3.7/5.5 | 10/15.0 | 9/13 | 3.7/5.5 |
| Z2400-5R5G | 5.5 | 15 | 13 | 5.5 |
| Z2400-7R5G/11P | 7.5/11 | 20/26 | 17/25 | 7.5/11 |
| Z2400-11G/15P | 11/15 | 26/35 | 25/32 | 11/15 |
| Z2400-15G/18.5P | 15/18.5 | 35/38 | 32/37 | 15/18.5 |
| Z2400-18.5G/22P | 18.5/22 | 38/46 | 37/45 | 18.5/22 |
| Z2400-22G/30P | 22/30 | 46/62 | 45/60 | 22/30 |
| Z2400-30G/37P | 30/37 | 62/76 | 60/75 | 30/37 |
| Z2400-37G/45P | 37/45 | 76/90 | 75/90 | 37/45 |
| Z2400-45G/55P | 45/55 | 90/105 | 90/110 | 45/55 |
| Z2400-55G | 55 | 105 | 110 | 55 |
| Z2400-75G/90P | 75/90 | 140/160 | 150/176 | 75/90 |
| Z2400-90G/110P | 90/110 | 160/210 | 176/210 | 90/110 |
| Z2400-110G/132P | 110/132 | 210/240 | 210/253 | 110/132 |
| Z2400-132G/160P | 132/160 | 240/290 | 253/300 | 132/160 |
| Z2400-160G/185P | 160/185 | 290/330 | 300/340 | 160/185 |
| Z2400-185G/200P | 185/200 | 330/370 | 340/380 | 185/200 |
| Z2400-200G/220P | 200/220 | 370/410 | 380/420 | 200/220 |
| … | ||||
*Note: If you have any special requirements for VFD inverter, pls feel free to contact us directly, we can customize for you.
Workshop
VFD inverter Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.