Ac Variable Frequency Drive Inverter 22kw 380v Low Voltage RS485
T200 Series VFD Frequency Inverter AC Drives 22KW
Basic product introduction:
Meet the ZONCN T200 Series Inverter—a game-changer engineered to simplify complexity. At its core lies an embedded EMC filter, a self-contained shield against electrical noise that slashes installation costs and guarantees hassle-free compliance. Whether you’re automating a smart factory or retrofitting legacy systems, the T200’s multi-protocol communication suite (Modbus, EtherCAT, CANopen, PROFINET) acts as a universal translator, effortlessly syncing with PLCs, sensors, and IoT platforms.
Safety isn’t an afterthought here. The STO feature provides fail-safe torque termination, protecting both operators and machinery without compromising productivity. Precision? The inverter’s closed-loop vector control adapts to any motor type, enhanced by plug-in PG cards for feedback-driven accuracy in robotics, CNC systems, or precision packaging lines. And when it’s time to tweak settings, the RJ45 keyboard port offers a rugged, interference-resistant connection—configure parameters on the fly, even in dusty or humid environments.
Compact yet mighty, the T200 isn’t just about specs; it’s about empowering engineers to innovate faster, smarter, and safer.
Product technical parameters:
| Item | T200 technical parameters |
| Maximum frequency | Vector control:0～600Hz V/F control:0-3200Hz |
| Control mode | V/F control；Senseless flux vector control(SFVC); Closed loop vector control (CLVC) |
| Carrier frequency | 0.5kHz～16kHz The carrier frequency can be automatically adjusted based on the load feature |
| Input frequency resolution | Digital setting:0.01Hz Analog setting: maximum frequency×0.025% |
| Startup torque | G Type:0.5Hz/150%(SFVC)； P Type:0.5Hz/100% |
| Speed range | 1:100(No PG) |
| Speed stability accuracy | ±0.5%(No PG) |
| Torque control accuracy | ±5%(FVC) |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current P type: 60s for 120% of the rated current, 3s for 150% of the rated current |
| Torque boost | Fixed boost；Customized boost 0.1%-30.0% |
| V/F curve | Straight-line V/F curve；Multi-point V/F curve； N-power V/F curve (1.2-power, 1.4-power, 1.6- power,1.8-power, square) |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp；S-curve ramp Four groups of acceleration/deceleration time with the range of 0.00-6500.0s |
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency Braking time: 0.0-100.0s Braking action current value: 0.0%–100.0% |
| JOG control | Jog frequency range:0.00Hz~50.00Hz. Jog acceleration/deceleration time0.0s~6500.0s |
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by input terminal state |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation (AVR) | It can keep constant output voltage automatically when the mains voltage changes |
| Over-voltage/Over-current stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current. |
| Rapid current limit | It helps to avoid frequent over-current faults of the inverter |
| Torque limit and torque control | It can limit the torque automatically and prevent frequent over-current tripping during the running process |
| High performance | Control of asynchronous motor is implemented through the high-performance current vector control technology |
| Instantaneous stop doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time |
| Timing control | Timing range 0.0Min～6500.0Min |
| Communication methods | RS485；EtherCAT；Profibus-DP；CAN is optional |
| Protection mode | Motor short-circuit detection at power-on, input output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
| Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function. |
| Running command channel | Given by the panel, control terminals, Serial communication port, can be switched by many ways |
Frequency inverter specifications:
| Model | Input voltage | Rated output power(kw) | Rated input current(A) | Rated output current(A) | Motor power(kw) |
| T200-0R4G-2 | AC 1PH 220V± 15% | 0.4 | 5.4 | 2.5 | 0.4 |
| T200-0R75G-2 | 0.75 | 7.2 | 5.0 | 0.75 | |
| T200-1R5G-2 | 1.5 | 10.0 | 7.0 | 1.5 | |
| T200-2R2G-2 | 2.2 | 16.0 | 11.0 | 2.2 | |
| T200-0R4G-4 | AC 3PH 380V±15% | 0.4 | 3.4 | 1.2 | 0.4 |
| T200-0R75G-4 | 0.75 | 3.8 | 2.5 | 0.75 | |
| T200-1R5G-4 | 1.5 | 5.0 | 3.7 | 1.5 | |
| T200-2R2G-4 | 2.2 | 5.8 | 5.0 | 2.2 | |
| T200-3R0G-4 | 3.0 | 8.5 | 7.0 | 3.0 | |
| T200-3R7G/5R5P-4 | 3.7/5.5 | 10/15 | 9/13 | 3.7/5.5 | |
| T200-5R5G/7R5P-4 | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 | |
| T200-7R5G/11P-4 | 7.5/11 | 20/26 | 17/25 | 7.5/11 | |
| T200-11G/15P-4 | 11/15 | 26/35 | 25/32 | 11/15 | |
| T200-15G/18.5P-4 | 15/18.5 | 35/38 | 32/37 | 15/18.5 | |
| T200-18.5G/22P-4 | 18.5/22 | 38/46 | 37/45 | 18.5/22 | |
| T200-22G/30P-4 | 22/30 | 46/62 | 45/60 | 22/30 | |
| T200-30G/37P-4 | 30/37 | 62/76 | 60/75 | 30/37 | |
| T200-37G/45P-4 | 37/45 | 76/90 | 75/90 | 37/45 | |
| T200-45G/55P-4 | 45/55 | 92/113 | 90/110 | 45/55 | |
| T200-55G/75P-4 | 55/75 | 113/157 | 110/152 | 55/75 |
T200 series expansion card selection:
| No. | Expansion card model | PCB internal model number | Function description | Applicable model |
| 1 | PG-T11-01 | T11PG01 | ABZ_ Differential input PG card _5V | T200-0.4-55 kw |
| 2 | PG-T11-02 | T11PG02 | ABZ_OC& Push-pull input PG card _24V | |
| 3 | ET-T11-01 | T11JK01 | 1 normally open normally closed relay 2 DL_1 FIV_1 FOC | |
| 4 | ET-T11-02 | T11JK02 | 1 high speed pulse output _2 DI_1 FIV_1 FOC | |
| 5 | CM-T11-01 | T11CM01 | ProfibusDP communication card | |
| 6 | CM-T11-02 | T11CM02 | Ethercat communication card | |
| 7 | CM-T11-03 | T11CM03 | CAN communication card | |
| 8 | CM-T11-04 | T11CM04 | Modbus TCP communication card | |
| 9 | CM-T11-05 | T11CM05 | Profinet communication card | |
| Note: This model only has 1 multi-function expansion card interface, communication card and PG share this interface Communication card and PG card can only select one extension, not compatible at the same time. | ||||
T200 series product circuit diagram:
FAQ:
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.