JZP-1.2C Rubber Shock Absorber Energy Harvesting Integration Ready Vibration Energy Harvesting Isolator Mount
JZP-1.2C Rubber Shock Absorber — Energy Harvesting Integration Ready
The JZP-1.2C is a prefabricated rubber shock absorber developed for efficient vibration and noise isolation across machinery, equipment and building structures. Its 1.2 kg nominal load rating and customizable layout let it fit a wide range of installations while holding a stable 35±3 Hz resonant frequency. This model is prepared for energy harvesting integration, turning residual vibration into useful data and power opportunities.
Energy Harvesting Integration Ready
Rather than treating vibration only as a disturbance, the JZP-1.2C is prepared for energy harvesting integration. Its mounting geometry and predictable load path create a stable interface where a harvester element can be coupled to the moving mass without altering isolation behaviour. The absorber therefore supports designs that recover part of the residual vibration as usable power for monitoring electronics.
Vibration Energy Harvesting Ready
Because the unit keeps a well defined deflection range under downward pressure, it provides a repeatable motion source for vibration energy harvesting. Engineers can size a harvester around the known resonance and load, so low-power sensors, data loggers and condition-monitoring nodes can run from collected vibration instead of replaceable cells. This keeps remote installations self-powered and reduces routine maintenance visits.
Technical Parameters (JZP-1.2C)
| Model | JZP-1.2C |
| Pz Nominal Load (Kg) | 1.2 |
| Deformation Displacement (mm) | ≤0.3 |
| Resonant Frequency (Hz) | 35±3 |
| Working Temperature (℃) | -45 to +65 |
| Shock (Ks) | 100g/6ms |
| Peak Response (G) | ≤3.6km/s2 |
| Vibration (Kv) | Accord with National Standard GJB150-16 |
| Length | 3-12 inches |
| Wire Rope Length | 6 inches |
JZP-C Series Load Reference
| Technical Parameter | JZP-0.3C | JZP-0.5C | JZP-0.8C | JZP-1.0C | JZP-1.2C | JZP-1.5C | JZP-1.8C | JZP-2.0C | JZP-2.5C | JZP-3.0C |
| Pz Nominal Load (Kg) | 0.3 | 0.5 | 0.8 | 1.0 | 1.2 | 1.5 | 1.8 | 2.0 | 2.5 | 3.0 |
Typical Applications
- Machinery, pumps and industrial equipment vibration control.
- Building structures exposed to low-frequency vibration and noise.
- Self-powered condition-monitoring and sensor nodes.
- Energy harvesting pilot installations on vibrating machinery.
- Precision equipment that needs a stable isolation base.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.