High quality fuel pump control unit 4F0 906 093 L for A4
Price:
22.1USD
MOQ:
1pcs
Delivery Time:
3-7days
Brand:
Boigevis
Product Description
High quality Fuel Pump Control Unit 4F0 906 093 L for Audi A4
This OEM-spec fuel pump control module with part number 4F0 906 093 L is the core electronic drive component of the fuel supply system for Audi A4 B7 2.0T FSI. It maintains steady market demand and continuous repeat orders in the global VAG auto aftermarket, widely stocked by professional Audi service workshops and cross-border auto parts wholesalers, and supports one-stop bundled procurement together with fuel pump assemblies, fuel filters and fuel system overhaul kits.
Core Selling Points
Popular electronic maintenance part for centralized bulk purchasing
Mounted near the fuel tank, this control unit receives commands from the engine ECU to adjust the operating speed and output power of the in-tank fuel pump. It suffers long-term temperature alternation, vibration load and humidity erosion. Internal circuit aging, capacitor failure and poor soldering joints are typical failure causes.
A defective fuel pump control unit will lead to unstable fuel system pressure, difficult cold startup, power loss and hesitation during acceleration, intermittent engine stalling while driving, and related fuel pressure fault codes stored in ECU. Many customers place bulk orders together with fuel pump modules, sealing rings and fuel filters to cut procurement and shipping costs, bringing stable profit margins and low inventory turnover pressure for distributors all year round.
100% OEM electrical and dimensional matching, direct plug-and-play installation without modification
Manufactured strictly in accordance with Volkswagen Group official technical standards. The overall housing outline, mounting hole spacing, plug pin definition and internal driving parameters are fully consistent with genuine 4F0906093L. Interchange OE references include 4F0906093B, 4F0906093G and 4F0906093C.
No wiring modification or ECU coding adaptation is required after replacement. It perfectly matches the original wiring harness and mounting bracket of Audi A4 B7, greatly shortening vehicle electrical system troubleshooting and maintenance hours.
Applicable Vehicles & Installation Information
- Main applicable model: Audi A4 B7 (8E/8H chassis) 2.0T FSI
- Compatible extended models: Audi A6 C6, SEAT Exeo equipped with the same fuel control system
- Matching engine: 2.0T FSI gasoline engine (BWA, BFB, BZD)
- Installation position: Electronic control module beside the fuel tank, used to drive the in-tank fuel pump
Optimized Durable Structural Design
- High-strength flame-retardant plastic housing: Good heat resistance and moisture resistance, effectively protecting internal circuit boards
- Upgraded reinforced circuit board and high-quality capacitors: Anti-aging, stable performance under frequent temperature changes
- Standard waterproof multi-pin connector: Prevent water vapor and dust from invading to avoid poor contact
- Precision drive chip: Accurately adjust fuel pump rotating speed to maintain stable fuel rail pressure
- Complete finished assembly, ready for direct replacement installation
Core Functions & Engine Protection
- Receive signal instructions from engine ECU to dynamically control fuel pump operation and adjust fuel supply pressure
- Maintain stable fuel pressure under idle, acceleration and high-speed driving conditions to guarantee sufficient fuel supply
- Optimize fuel pump working mode, reduce unnecessary power consumption and lower pump wear
- Avoid power attenuation, jitter and flameout risks caused by insufficient fuel supply
Common Fault Phenomena That Can Be Solved
- Engine cranks normally but fails to start; no humming sound from fuel pump
- Intermittent difficult startup, especially after hot parking
- Obvious lack of power and hesitation when stepping on the accelerator
- Engine stalls unexpectedly during driving and may restart after cooling down
- Diagnostic scanner detects fault codes P0087, U0109 related to fuel supply system
Factory Testing & Stable Spot Supply
Each fuel pump control unit passes continuous power aging test, high-low temperature cyclic test, vibration durability test and waterproof inspection before delivery, complying with IATF 16949 automotive industry quality standards.
Adequate spot inventory supports mixed purchase with fuel pump assemblies, fuel filters, sealing gaskets and complete Audi A4 fuel system maintenance kits. Neutral packaging and private label OEM customization services are available for global wholesale customers.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Boigevis Trading (guangzhou) Co., Ltd.
Location
A012, Liyuan Plaza, Yongfu Road, Yuexiu District, Guangzhou City, Guangdong Province, China
Contact Person
Jack