Since its establishment, Guangzhou Di'angtianke Automation Equipment Co., Ltd. has been committed to solving the "waste liquid and slag" problems brought by industrial processes for customers in the metal processing field. The company has a highly skilled and professional R&D team, dedicated to providing environmentally friendly purification products to domestic and foreign customers. The company provides personalized services and provides solutions based on the on-site processing volume of customers.

Traditional grinding fluid treatment methods:
1. Natural sedimentation is achieved by using a water tank as a partition to increase the isolation sedimentation time. This method has a certain effect on large particles, but due to the flow of grinding fluid during the machining process, it has almost no effect on suspended particles;
2. Using filter paper filtration, filter paper filtration can remove some particles. Due to the disposable use of filter paper and the online processing process, the consumption is also relatively high;
3. Directly using magnetic filters can remove certain particles, but the removal effect is not good for grinding wheel powder and other materials;
4. The grinding fluid cannot be effectively treated, and when the particle concentration reaches a certain level, the grinding fluid can only be replaced. The replacement process is cumbersome and generates a large amount of waste liquid.

Treatment method for grinding fluid purification machine:
1. The first level purification uses a filter basket for direct filtration, which can effectively filter out some coarser solid particles. The filter basket is made of non
Rust steel structure, easy to use and install, reusable, and consumables free;
2. The intelligent separation structure used for secondary purification can efficiently separate small particles in suspension, with a minimum particle size of 0.02mm. It adopts a special alloy material structure, which is pressure resistant, wear-resistant, and consumables free; And it can quickly extract metal powder and remove moisture, achieving rapid dry and wet separation of metal powder, separating relatively dry iron slag powder and automatically discharging it from the machine;
 

Equipment parameters of grinding fluid purification machine:
1. Equipment dimensions: length 1100 * width 600 * height 1200mm
2. Processing flow rate: 6000 liters/hour
3. Filter basket capacity: 14 liters
4. Filtering accuracy: 20 microns
5. Working voltage: AC220V
6. Equipment power: 120W
7. Operating temperature: 0-50 ℃