The Water Pump Assembly (OEM Numbers: 8-97333361-0 / 8973333610 and 8-97313904-0 / 8973139040) is a premium-quality, direct replacement cooling system component designed for Isuzu NPR66 medium-duty trucks equipped with the 4HF1 diesel engine.

Engine water pump circulates coolant through the engine block, cylinder head, and radiator to maintain optimal operating temperature. Prevents overheating and ensures efficient performance for Isuzu 4HF1 diesel engines.

• OE Quality: Manufactured to Isuzu dimensional and material specifications for perfect fit and reliable cooling
• Precision Impeller: Cast or stamped impeller designed for maximum coolant flow at all engine speeds
• Heavy-Duty Bearing: Sealed ball bearing with high-temperature grease for long life under heavy loads
• Mechanical Seal: Ceramic or carbon face seal prevents coolant leakage and resists wear
• Corrosion-Resistant Housing: Cast iron or aluminum housing treated to resist rust and electrolysis
• Dynamically Balanced: Ensures smooth, quiet operation without vibration
• Restores Cooling Performance: Eliminates overheating, coolant loss, and bearing noise
• Direct Replacement: Matches OE mounting holes, inlet/outlet positions, and pulley fitment
• Cost-Effective: Affordable alternative to genuine OEM without compromising reliability

This water pump is specifically designed for Isuzu NPR66 trucks with 4HF1 engine.

• ISUZU NPR66 (medium-duty truck, 4HF1 engine)
• May also fit other Isuzu trucks using the 4HF1 engine (e.g., NPR59, NKR) - verify compatibility

• 4-Cylinder, Inline Diesel, Direct Injection
• Displacement: 3.9L (3856cc)

Installation steps (overview):

1. Drain coolant from radiator and engine block
2. Remove drive belt by loosening tensioner or idler pulley
3. Remove fan and fan clutch (if applicable) by unbolting from water pump flange
4. Disconnect hoses, noting positions (inlet, outlet, bypass)
5. Unbolt old water pump, noting bolt lengths and positions
6. Clean mating surface on engine block, removing old gasket material without scratching
7. Compare new pump with old to check mounting, port locations, and pulley fit
8. Install new gasket on block (some gaskets have adhesive backing)
9. Install new water pump, tightening bolts in sequence to specification (typically 20-30 Nm)
10. Reconnect hoses using new hose clamps if needed
11. Reinstall fan and fan clutch, torquing bolts to specification
12. Reinstall drive belt with correct routing and tension
13. Refill coolant using recommended type, filling slowly to avoid air pockets
14. Bleed the cooling system by running engine with heater on high, using bleed valve if equipped
15. Check for leaks at pump gasket and hose connections
16. Test drive while monitoring engine temperature gauge

• Material Verification: Housing material and seal composition tested
• Dimensional Inspection: Mounting flange, shaft diameter, inlet/outlet sizes verified against OE blueprints
• Leak Test (Pressure/Vacuum): Each pump tested for seal integrity with no coolant bypass
• Bearing Noise Test: Rotated to check for smooth, quiet operation
• Impeller Balance: Dynamic balance checked to minimize vibration
• Visual Inspection: 100% checked for casting defects, cracks, or damage
• Packaged Safely: Pump sealed in plastic bag, boxed with foam protection

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Water Pump Assembly 8-97333361-0 For Isuzu NPR66 4HF1 8973333610 Isuzu Auto Parts, please contact our sales team for a competitive quote and expert technical support.