Nissan Cylinder Head Gasket 11044-54T04 with Multi-layer Steel (MLS) Construction, 1.15 mm Thickness, and Stainless Steel Fire Rings for BD30 Diesel Engine
Price:
Negotiable
MOQ:
10 pcs
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Cylinder Head Gasket 11044-54T04
The cylinder head gasket carrying Nissan genuine OE number 11044-54T04 seals the combustion chamber between the cylinder head and engine block on Nissan BD30 3.0D diesel engines. It is a direct factory-spec replacement for sealing components in Nissan Terrano 1 (WD21) and Nissan Trade V.U. series vehicles manufactured from the mid-1980s through the mid-1990s.
Product Specifications
| Part Number: | 11044-54T04 | Product Name: | Cylinder Head Gasket |
| Car Model: | Nissan Terrano Trade | Engine Model: | Nissan WD21 BD30 |
| Condition: | 100% Brand New | Size: | Standard |
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |
Applications
This Nissan cylinder head gasket 11044-54T04 directly replaces the factory sealing components in the following configurations:
| Chassis / Model | Generation / Code | Engine | Years | Notes |
|---|---|---|---|---|
| Nissan Terrano 1 | WD21 | BD30 (3.0D diesel) | 08.1986 - 02.1996 | First-generation off-road SUV, global export markets |
| Nissan Trade | V.U. series | BD30 (3.0D diesel) | 04.1993 - 06.1996 | Light-commercial truck / chassis cab, Asian and European markets |
Critical Fitment Note
The 11044-54T0X family includes multiple thickness variants. Before ordering, verify the number of notches or holes on your original gasket. This 11044-54T04 variant is the 1.15 mm thickness with 1 notch / hole.
Features & Benefits
Multi-Layer Steel Construction
Precision-stamped stainless steel layers with embossed sealing beads maintain consistent clamping force through thousands of thermal cycles.
Stainless Steel Fire Rings
Pre-compressed fire rings create gas-tight seals around combustion chambers, resisting temperatures up to 800°C.
Elastomer Coating
Heat-activated coating flows into surface imperfections, sealing oil and coolant passages without additional sealants.
Precision Thickness Selection
1.15 mm compressed thickness with 1 identification notch ensures correct compression ratio and sealing pressure.
Thickness Family Specifications
| OE Number | Notches / Holes | Thickness (mm) | When to Use |
|---|---|---|---|
| 11044-54T04 | 1 | 1.15 | Standard piston protrusion - most common |
| 11044-54T05 | 2 | 1.20 | Slightly increased protrusion |
| 11044-54T06 | 3 | 1.25 | Increased protrusion |
| 11044-54T07 | 3 | 1.30 | Maximum protrusion |
Installation & Maintenance
⚠️ IMPORTANT
The BD30 engine uses torque-to-yield (stretch) cylinder head bolts. These are single-use fasteners and must be replaced with new units whenever the cylinder head is removed.
Recommended Replacement Indicators
| Symptom | Diagnosis |
|---|---|
| Gradual coolant loss with no visible external leak | Coolant escaping past head gasket into combustion chamber |
| White steam from exhaust on cold start | Coolant burning in combustion chamber - head gasket failure |
| Bubbles in coolant overflow bottle with engine running | Combustion gases entering cooling system |
| Pressurised cooling system (hoses rock-hard from cold) | Combustion pressure entering cooling system |
| Milky residue under oil cap or on dipstick | Coolant mixing with engine oil - internal head gasket failure |
Maintenance Schedule
| Service Item | Interval |
|---|---|
| Replace engine coolant | Every 2-3 years |
| Inspect cooling system hoses for pressure when cold | Monthly |
| Check for coolant loss or external leaks | At every oil change (5,000 km) |
| When cylinder head is removed for any reason | Always replace head bolts and head gasket |
Packaging & Supply
- Individual packaging: Sealed in anti-static VCI bag, foam-lined carton
- Gasket dimensions: 470 mm length, 97.5 mm bore
- Net weight: Approximately 0.5-0.8 kg
- Lead time: 3-7 working days for stock orders
- Minimum order quantity: 1 piece (sample order available)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
4F, 7th, No. 2, South Jinguu Road, Huadong Town, Huadu District, Guangzhou City
Contact Person
James