OEM Specifiion Fuel Filter Assembly Complete Assembly for High-Pressure Fuel System Protection in Toyota Hiace 1KD 2KD Diesel
Price:
Negotiable
MOQ:
10 pcs
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Fuel Filter Assembly 23300-30201 For Toyota Hiace 1KD 2KD 2.5 3.0 D4D Diesel
Product Overview
The fuel filter assembly with Toyota OEM number 23300-30201 is a critical component of the fuel system for Toyota diesel vehicles. It serves as the primary defense against fuel-borne contaminants, trapping dirt, rust, and other particles before they can reach the high-pressure pump and injectors.
This assembly is designed for Toyota's common rail diesel systems, which operate with extremely tight tolerances. Even microscopic contaminants can cause premature wear or failure of these precision components. The filter assembly works by passing fuel through a filtering medium within a housing that integrates seamlessly with the vehicle's fuel line.
| Part Number: | 23300-30201 |
| Product Name: | Fuel Filter Assembly |
| Car Model: | Toyota Hiace |
| Engine Model: | Toyota 1KD 2KD |
| Condition: | 100% Brand New |
| Origin: | China Mainland |
Vehicle Appliions
This Toyota fuel filter assembly 23300-30201 is a direct replacement for the factory component in vehicles equipped with 1KD-FTV and 2KD-FTV D4D diesel engines.
Primary Fitment
| Model | Chassis / Series | Engine | Years |
|---|---|---|---|
| Toyota Hiace / Commuter | KDH2## series (e.g., KDH220, KDH222) | 1KD-FTV (3.0L) / 2KD-FTV (2.5L) | 03.2005 - 04.2010 |
| Toyota Hiace | LH2## series | 5L-E (3.0L) | 03.2005 - 04.2010 |
Compatible Engine Codes
- 1KD-FTV (3.0L D4D)
- 2KD-FTV (2.5L D4D)
- 5L-E (3.0L)
Important Fitment Note: This filter is specific to D4D common rail diesel engines used in the Toyota Hiace and related commercial vehicles. It is not for petrol engines. Always verify fitment by checking your vehicle's chassis number or comparing the original part number before ordering.
Features & Benefits
Genuine OE Specifiion
This filter assembly carries the exact Toyota part number 23300-30201. It is a direct, bolt-on replacement for the factory unit, confirmed by OE manufacturers like Hengst.
Complete Assembly - Ready to Install
This is a complete fuel filter assembly, not just an element. It includes the housing and all necessary connections, eliminating the need to transfer components from the old unit.
Protects High-Pressure Fuel System
The 1KD and 2KD fuel systems are sensitive to contamination. This filter assembly provides necessary protection to ensure the longevity of the entire fuel system.
Restores Engine Performance
Replacing a clogged filter with this assembly restores fuel pressure and flow, eliminating symptoms like power loss and rough idling.
IATF 16949 / ISO 9001 Certified Manufacturing
Manufactured under IATF 16949 and ISO 9001 certified quality management systems with batch tracking and material certifies.
Quality Control & Verifiion
| QC Item | Verifiion Method |
|---|---|
| Filtration efficiency | Bench testing with calibrated test dust |
| Housing integrity | Pressure testing - no leaks at operating pressure |
| Dimensional accuracy | CMM measurement for correct fitment |
| Flow rate | Flow bench testing meets Toyota specifiion |
| Seal integrity | Leak testing at rated pressure |
| Visual inspection | 100% inspection for defects |
Installation & Maintenance
⚠️ IMPORTANT: Diesel fuel systems operate at high pressure. Always depressurize the system before working on the fuel filter. Wear appropriate safety equipment.
When to Replace Fuel Filter
| Symptom | Diagnosis |
|---|---|
| Loss of power under acceleration | Restricted fuel flow due to clogged filter |
| Difficulty starting, especially when cold | Fuel starvation - filter may be blocked |
| Rough idle or engine misfire | Contaminated fuel or restricted flow |
| Diminished fuel efficiency | Engine working harder due to restricted fuel supply |
| Water-in-fuel warning light | Water accumulation - immediate replacement required |
| Preventive maintenance | Every 30,000-40,000 miles (50,000-60,000 km) |
Maintenance Schedule
| Service Item | Interval |
|---|---|
| Replace fuel filter assembly | Every 30,000-40,000 miles (50,000-60,000 km) |
| Drain water from fuel filter | At every service interval |
| Inspect fuel lines for cracks or leaks | At every service |
| Replace fuel filter cap O-ring | When replacing the filter assembly |
Packaging & Supply
- Individual packaging: Sealed in protective packaging, foam-lined carton
- Carton dimensions: Approximately 15 × 12 × 10 cm
- Master carton: 50 units per export carton
- Lead time: 3-7 working days for stock orders
- Minimum order quantity: 1 piece (sample order available)
- Shipping methods: FedEx, UPS, DHL for samples; sea freight for bulk
- H/S Code: 8421.23
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James