Engine Overhaul Gasket Kit with MLS Cylinder Head Gasket for Ford Duratorq 2.2L TDCi - Complete Sealing Solution
Price:
Negotiable
MOQ:
10 pcs
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Engine Overhaul Gasket Kit BK3Q-6079-AA For Ford Ranger 2.2 TDCi Duratorq
Product Overview
The engine overhaul gasket kit with Ford OEM number BK3Q-6079-AA (also BK3Q6079AA, BK3Q-6079-AA, UHY2-99-100) is a complete sealing solution for the Ford Duratorq 2.2L TDCi diesel engine - also known as the ZSD-422 - that powers Ford's globally successful light commercial and SUV platforms.
| Part Number: | BK3Q-6079-AA | Product Name: | Engine Overhaul Gasket Kit |
| Car Model: | Ford Ranger 2.2 | Engine Model: | Ford TDCi Duratorq |
| Condition: | 100% Brand New | Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe | ||
Vehicle Appliions
This Ford engine overhaul gasket kit BK3Q-6079-AA directly replaces factory sealing components in the following configurations:
Ford Ranger (TKE / T6 Platform)
| Model | Years | Notes |
|---|---|---|
| Ford Ranger TKE (2.2 TDCi) | 2011-present | 120PS, 130PS, 150PS, 160PS variants |
| Ford Ranger Raptor (2.2 TDCi) | 2015-present | Selected markets |
| Ford Everest (2.2 TDCi) | 2015-present | SUV platform |
| Ford Transit (V347, V348) | 2011-2014 | 2.2 TDCi RWD |
| Ford Transit Custom | 2012-present | 2.2 TDCi |
Mazda (Ford-Derived Platform)
| Model | Years | Notes |
|---|---|---|
| Mazda BT-50 | 2006-present | 2.2 TDCi |
Kit Contents
BK3Q-6079-AA is a comprehensive full gasket set containing every sealing component required for a complete engine overhaul or top-end rebuild on the 2.2L Duratorq:
| Component | Notes |
|---|---|
| Cylinder head gasket | MLS (Multi-Layer Steel) with elastomer coating |
| Valve cover gasket (rocker cover) | Seals the overhead camshaft area |
| Valve stem seals | 16 pieces (8 intake, 8 exhaust) |
| Intake manifold gasket | With plenum gasket |
| Exhaust manifold gasket | Includes turbocharger inlet gasket where applicable |
| Oil pan gasket | One-piece design |
| Timing cover gaskets | Front cover seals and O-rings |
| Rear crankshaft seal | Oil seal at transmission interface |
| Camshaft seals | Front seals for intake and exhaust camshafts |
| Water pump gasket | For water pump replacement |
| Thermostat housing gasket | Coolant outlet housing seal |
| Oil filter adapter gasket | Seals oil cooler or filter housing |
| O-ring sets | Various - for coolant bypass, oil dipstick tube, vacuum pump |
| Turbocharger gasket | Manifold-to-turbocharger seal |
| Fuel injector O-rings / copper washers | For injector replacement service |
What is NOT included: Cylinder head bolts. The 2.2L Duratorq uses torque-to-yield (stretch) cylinder head bolts that must be replaced whenever the cylinder head is removed.
Features & Benefits
- Multi-Layer Steel (MLS) Cylinder Head Gasket - Factory specifiion with heat-activated elastomer coating
- Complete Single-Kit Solution - All necessary gaskets and seals for 2.2L Duratorq engine overhaul
- Heat-Resistant Elastomer Seals - NBR, EPDM, and FKM materials for turbo-diesel appliions
- Direct OE Interchange Coverage - Cross-referenced with UHY2-99-100, AB31-6260-AA, U2Y2-10-271A
- Compatible with 2.2L Duratorq Engine Family - All power output variants from 120PS to 160PS
- IATF 16949 / ISO 9001 Certified Manufacturing - Automotive industry's highest quality standards
Installation & Maintenance
⚠️ IMPORTANT: The 2.2L Duratorq uses torque-to-yield (stretch) cylinder head bolts. These are single-use fasteners and must be replaced with new units whenever the cylinder head is removed.
Recommended Replacement Indiors
| Symptom | Diagnosis |
|---|---|
| Gradual coolant loss with no visible external leak | Coolant escaping past the fire ring into combustion chamber |
| White or grey steam from exhaust when engine is warm | Coolant burning in combustion chamber - head gasket breach |
| Bubbles in coolant overflow bottle with engine running | Combustion gases entering cooling system |
| Pressurised cooling system when engine is cold | Combustion gases pressurising cooling system |
| Milky residue under oil filler cap or on dipstick | Coolant mixed with engine oil - internal gasket failure |
Packaging & Supply
- Individual packaging: Sealed in anti-static VCI bag, foam-lined carton
- Packaging dimensions: Approximately 66 × 43 × 6 cm
- Net weight: Approximately 2.0 kg
- Gross weight: Approximately 2.5 kg
- Master carton: 20 units per export carton
- Lead time: 3-7 working days for stock orders
- Minimum order quantity: 1 piece
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James