Multi-Layer Steel (MLS) Cylinder Head Gasket 1.1mm Thickness for Toyota 2KD-FTV 2.5 D-4D Engine
Price:
Negotiable
MOQ:
10 pcs
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Product Overview
The Cylinder Head Gasket with OEM reference number 11115-30040-E0 is a verified direct-fit replacement for the Toyota 2KD-FTV 2.5L D-4D common rail turbo-diesel engine. This critical sealing component sits between the engine block and cylinder head, withstanding extreme temperatures and pressures.
Part Number:
11115-30040-E0
Product Name:
Cylinder Head Gasket
Car Model:
Toyota Hilux
Engine Model:
Toyota 2KD-FTV 2.5 D-4D
Condition:
100% Brand New
Thickness Grade Reference
This gasket is available in multiple thickness grades identified by notches/holes. Selection is based on measured piston protrusion.
| Mark | Notches | Thickness Range | Nominal Thickness | OE Number |
|---|---|---|---|---|
| Mark A | 1 notch | 0.800-0.900 mm | 0.9 mm | 11115-30040-A0 |
| Mark B | 2 notches | 0.850-0.950 mm | 0.95 mm | 11115-30040-B0 |
| Mark C | 3 notches | 0.900-1.000 mm | 1.0 mm | 11115-30040-C0 |
| Mark D | 4 notches | 0.950-1.050 mm | 1.05 mm | 11115-30040-D0 |
| Mark E | 5 notches | 1.000-1.100 mm | 1.1 mm | 11115-30040-E0 |
Vehicle Compatibility
Primary Appliions (Toyota 2KD-FTV 2.5 D-4D Engine):
| Brand | Model | Chassis / Series | Years |
|---|---|---|---|
| Toyota | Hilux / 4Runner Truck | KUN25, KUN35 (Vigo) | 2005-2011 |
| Toyota | HiAce | H100, H200 (KLH12, KLH22) | 2006-2012 |
| Toyota | Dyna / Toyoace | Various | Various |
| Toyota | Fortuner | Various | Various |
| Toyota | Innova / Kijang / Revo / Unser / Zace | Various | Various |
Important: Always verify the correct thickness grade for your specific engine appliion. The required grade depends on piston protrusion measurements.
Features & Benefits
| Feature | Benefit |
|---|---|
| Multi-Layer Steel (MLS) construction | Superior sealing performance under extreme turbo-diesel temperatures and pressures |
| Precision-engineered E-grade (1.1mm) thickness | Correct thickness for engines with higher piston protrusion (0.205-0.255mm) |
| 93.5mm diameter with 183 x 470mm dimensions | Precision fit for 2KD-FTV engine - matches factory specifiions exactly |
| 5-notch identifiion | Clear visual identifiion of E-grade thickness - eliminates installation errors |
| Genuine OEM / OEM-grade quality | Manufactured to Toyota's exacting standards - ensures perfect fit and reliable performance |
| Proven durability | Engineered for long service life under demanding turbo-diesel operating conditions |
| 100% quality inspected | Reliable out of the box - each unit verified for dimensional accuracy and material integrity |
Installation & Maintenance Recommendations
IMPORTANT: Cylinder head gasket replacement requires mechanical competence and proper torque procedures. Professional installation strongly recommended.
When to Replace:
- Engine overheating or coolant loss
- White exhaust steam (coolant burning)
- Oil/coolant cross-contamination (milky substance on oil cap)
- Loss of compression or reduced engine power
- During complete engine overhaul or rebuild
Installation Guidelines:
- Safety first - allow engine to cool completely before starting work
- Drain engine oil and coolant
- Remove cylinder head following manufacturer sequence
- Thoroughly clean both the cylinder block and cylinder head sealing surfaces
- Inspect the cylinder head and block for flatness
- Check cylinder head bolt threads - clean and inspect for damage
- Measure piston protrusion - determine the correct gasket grade
- Verify correct thickness - confirm that E-grade (5-notch, 1.1mm) is correct
- Place the new cylinder head gasket on the cylinder block
- Install cylinder head and torque bolts to manufacturer specifiion
- Reassemble all components, refill with fresh oil and coolant
- Start engine, check for leaks, and perform break-in procedure
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James