OEM Standard Spring Bushing 25x31x68mm Shore A 65-75 for Hino 300 500 Truck Suspension

Premium-quality suspension bushing designed for Hino 300 and 500 series medium-duty trucks. Functions to isolate road vibrations, absorb shocks, and reduce metal-to-metal wear between leaf spring and chassis.

• OE Quality: Manufactured to Hino dimensional and material specifiions for perfect fit and reliable performance
• Vibration Damping: Absorbs road shocks and vibrations, improving ride comfort and reducing driver fatigue
• Noise Reduction: Eliminates metal-to-metal contact, preventing clunks and squeaks from the suspension
• Weather Resistant: Rubber compound resists aging, ozone, and temperature extremes
• Corrosion-Protected Sleeves: Steel sleeves coated to resist rust
• Restores Suspension Integrity: Eliminates play, restoring proper axle alignment and ride quality
• Direct Replacement: Matches OE dimensions - press-fit installation
• Cost-Effective: Affordable alternative to genuine OEM bushings without compromising quality

This spring bushing is designed for Hino medium-duty trucks, including:

• Hino 300 Series (light/medium-duty trucks)
• Hino 500 Series (medium-duty trucks)
• Hino Dutro (compatible models)
• Hino Ranger (select models)

1. Safely lift and support the vehicle - support the axle or spring
2. Remove the leaf spring or shackle (if necessary to access the bushing)
3. Place the spring eye or shackle on a press - support around the bushing outer diameter
4. Press out the old bushing - use a socket or drift that contacts the outer metal sleeve. Apply penetrating oil if seized
5. Clean the bushing bore - remove rust, debris, and old rubber residue
6. Inspect the bore - check for ovality or damage. Replace the spring or shackle if necessary
7. Lubrie the new bushing outer sleeve - apply a thin film of soapy water or rubber-friendly lubricant
8. Press the new bushing into the bore - use a drift that contacts the outer sleeve only. Press until flush or to specified depth
9. Reinstall the leaf spring or shackle - torque mounting bolts to specifiion (with vehicle at ride height for rubber bushings)
10. Lower vehicle and test drive - listen for abnormal noise

• Material Verifiion: Rubber compound tested for hardness (Shore A), tensile strength, and elongation per ASTM standards
• Dimensional Inspection: Inner diameter (25mm), outer diameter (31mm), length (68mm), and concentricity verified against OE blueprints
• Rubber-to-Metal Bond Test: Pull test ensures bonding strength exceeds specifiion
• Compression Set Test: Sample bushing compressed at elevated temperature to ensure permanent deformation within limits
• Aging Test: Accelerated heat aging (70°C for 70 hours) to confirm retained elasticity
• Visual Inspection: 100% checked for voids, cracks, flash, or missing rubber
• Packaged Safely: Bushing wrapped in plastic bag, boxed to prevent deformation

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea