Piston Ring Set 06J198151M with Improved Wave Oil Ring for 82.5mm Cylinder Bore and 1.2×1.5×2.0mm Ring Profile
Price:
Negotiable
MOQ:
10 sets
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Piston Ring Set 06J198151M 06J-198-151-M for VW Audi 1.8/2.0 TSI EA888 — Improved Wave Oil Ring
Product Overview
The Piston Ring Set with OEM number 06J-198-151-M (also listed as 06J198151M, 06J 198 151 M) is a verified OEM-grade direct replacement for a wide range of Volkswagen, Audi, SEAT, and Škoda vehicles equipped with 1.8L and 2.0L TSI/TFSI EA888 Gen2 engines.
Key Specifiions:
- Real Shop Test Data: Precision-engineered with 1.2mm (top), 1.5mm (second), and 2.0mm (oil) ring thicknesses
- Proven Durability: Rated for 160,000+ km (100,000+ miles) under normal operation
- Installation Success Rate: 99% direct drop-in fitment
- OEM Cross-Reference: Replaces 06J198151, 06J198151A, 06J198151B, 06J198151G, 06D198151E, 06D198151D
Failure Symptoms
If your piston rings are failing, you may experience one or more of the following symptoms:
- Excessive Oil Consumption: Noticeable drop in oil level between service intervals
- Blue Exhaust Smoke: Bluish smoke from the exhaust, especially on cold starts or during acceleration
- Loss of Engine Power: Significant reduction in acceleration and overall engine performance
- Hard Starting: Extended cranking time before the engine starts
- Poor Fuel Economy: Increased fuel consumption due to reduced engine efficiency
- Spark Plug Fouling: Oil-fouled spark plugs leading to misfires and rough running
⚠️ Important: Worn or clogged piston rings, particularly the oil control ring, are a leading cause of oil consumption on EA888 Gen2 engines. Prompt replacement with the improved wave-type ring set is the most effective solution to restore engine performance and reliability.
Technical Specifiions
| Part Number | 06J198151M 06J-198-151-M |
| Product Name | Piston Ring Set |
| Car Model | VW Audi 1.8/2.0 |
| Engine Model | TSI EA888 |
| Condition | 100% Brand New |
| Material | High-strength aluminum alloy & precision bearings |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
Vehicle & Engine Compatibility
Compatible Brands: Volkswagen (VW), Audi, SEAT, Škoda
⚠️ CRITICAL: This ring set is for EA888 Gen2 1.8/2.0 TSI engines with 82.5mm cylinder bores only. NOT compatible with EA888 Gen3 engines.
Primary Appliions — Volkswagen
| Model | Generation / Chassis | Engine | Years |
|---|---|---|---|
| Golf / GTI | Mk5 (1K1), Mk6 (5K1) | 1.8 / 2.0 TSI | 2004-2013 |
| Jetta | Mk5 / Mk6 | 1.8 / 2.0 TSI | 2006-2014 |
| Passat | B6 (3C), B7 (362) | 1.8 / 2.0 TSI | 2005-2015 |
| Tiguan | 5N_ | 2.0 TSI | 2007-2018 |
Primary Appliions — Audi
| Model | Chassis / Generation | Engine | Years |
|---|---|---|---|
| A3 / A3 Sportback | 8P | 1.8 / 2.0 TFSI | 2003-2013 |
| A4 / A4 Avant | B8 (8K) | 1.8 / 2.0 TFSI | 2007-2015 |
| A5 | B8 (8T) | 2.0 TFSI | 2007-2017 |
| Q5 | 8R | 2.0 TFSI | 2008-2017 |
Quantity Required: Each set contains rings for one cylinder. A 4-cylinder engine requires 4 sets.
Features & Benefits
OEM Specifiion — RIKEN / MAHLE Genuine Equivalent
Guarantees factory-fit quality and performance — verified by OEM part numbers
Improved Wave-Type Oil Ring
Significantly reduces the risk of oil ring clogging from carbon deposits
82.5mm Cylinder Bore Precision Fit
Ensures correct ring-to-cylinder wall contact for optimal sealing and oil control
1.2mm / 1.5mm / 2.0mm Ring Profile
Matches EA888 Gen2 "thick ring" specifiions for correct ring tension and sealing
Wear-Resistant Materials
Delivers exceptional durability under high-stress engine environments
Direct Drop-In Fitment
No modifiions required — verified by 99% installation success rate
Installation & Maintenance Recommendations
⚠️ IMPORTANT: Professional Installation Highly Recommended. Piston ring installation requires specialized tools, precise measurement, and expert knowledge of engine assembly.
Pre-Installation Checklist
- Cylinder bores must be measured — ensure they are within specifiion
- Cylinder bores must be honed — proper cross-hatch pattern is essential
- Ring gaps must be checked — verify gaps match workshop manual specifiions
- Ring orientation is critical — follow workshop manual for correct positioning
- Quantity Required: 1 set per cylinder — order 4 sets for a 4-cylinder engine
Installation Guidelines
- Ensure the engine is completely disassembled with pistons removed
- Measure cylinder bore diameter and inspect for wear or damage — hone if necessary
- Clean the ring grooves on each piston thoroughly
- CRITICAL: Check each ring's end gap in the cylinder bore
- Install the oil control ring first, followed by the second compression ring, then the top compression ring
- CRITICAL: Ensure correct ring orientation — marks or letters should face upward
- CRITICAL: Stagger the ring gaps at 120° intervals
- Install the pistons into the cylinders using a piston ring compressor
- Reassemble the engine following workshop manual procedures
Packaging & Supply
- Packaging: Each piston ring set is securely packed in protective packaging
- Quantity Per Set: Rings for 1 cylinder — 4 sets required per 4-cylinder engine
- Suitable for: Wholesale distributors, engine rebuild shops, European specialty repair shops, and DIY enthusiasts
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James