Front Brake Lining Set with Acoustic Wear Warning Indior and High-Quality Friction Material for ISUZU HINO300 Truck - Direct OEM Replacement

High-performance front brake lining set delivers reliable stopping power, superior fade resistance, and consistent braking performance for ISUZU and HINO300 series trucks.

• OE Quality: Manufactured to strict OEM dimensional and performance specifiions for perfect fit and function
• Superior Friction Material: High-quality compound provides consistent braking power and excellent fade resistance
• Smooth Progressive Braking: Engineered for linear brake feel, minimizing noise and vibration
• Acoustic Wear Warning: Built-in wear indiors alert the driver when pad replacement is needed
• Heat Resistant: Withstands high temperatures generated during heavy-duty braking
• Low Dust Formulation: Reduces brake dust accumulation on wheels
• Restores Stopping Power: Eliminates reduced braking performance and increased stopping distances
• Protects Brake System: Prevents disc damage caused by worn-out pads
• Essential Safety Component: Critical for safe vehicle operation
• Direct Replacement: Simple installation during brake service
• Cost-Effective: Reliable brake performance with long service intervals
• Compliant: Meets or exceeds industry and safety standards

HINO300 Series:

• HINO300 3.5T / 5T (2007-2020)
• HINO300 BU100, BU102, BU107, BU112, BU142N, BU212N
• HINO300 BU301, BU306, BU346
• HINO300 BU420
• HINO300 XZU302D, XZU302H, XZU322D, XZU302N, XZU307, XZU337, XZU347

Toyota Dyna / Toyoace (Compatible Appliions):

• Toyota Dyna / Toyoace XZU304, XZU314, XZU324, XZU334, XZU344
• Toyota Dyna / Toyoace XZU368, XZU378, XZU388, XZU568
• Toyota Dyna / Toyoace XZU404, XZU414, XZU424, XZU454, XZU488

Compatible HINO Engines (Typical Appliions):

• 15B-F, 15B-FTE
• S05C
• N04C

Professional installation required. Brake system safety is critical:

1. Raise and secure the vehicle – Safely lift the front axle and support on jack stands
2. Remove the front wheels – Remove the front wheels for access to the brake assembly
3. Remove the brake calipers – Unbolt and carefully remove the brake calipers
4. Remove the old brake pads – Carefully remove the old pads from the caliper
5. Inspect brake discs – Check for scoring, wear, or damage; resurface or replace if necessary
6. Inspect brake calipers – Check for proper operation, leaks, or damage; rebuild or replace as needed
7. Clean the brake assembly – Thoroughly clean the caliper, mounting bracket, and surrounding area using brake cleaner
8. Lubrie contact points – Apply high-temperature brake grease to caliper slides and contact points (if applicable)
9. Install the new brake pads – Position the new pads in the caliper
10. Reinstall the brake calipers – Reinstall the calipers and torque bolts to manufacturer specifiion
11. Pump the brake pedal – Pump the brake pedal several times to seat the pads against the disc
12. Check brake fluid level – Check and top up brake fluid in the master cylinder reservoir as needed
13. Reinstall the wheels – Reinstall the front wheels and torque lug nuts to specifiion
14. Lower the vehicle – Lower the vehicle to the ground
15. Bed-in the new brake pads – Perform the recommended bed-in/break-in procedure per manufacturer guidelines
16. Test operation – Test drive the vehicle at low speeds to verify proper braking performance
17. Re-check torque – After the test drive, re-check wheel lug nut torque

• Material Verifiion: Friction material composition verified against OE specifiions
• Dimensional Inspection: Pad thickness, width, height, and mounting points verified against OEM tolerances
• Friction Testing: Coefficient of friction verified to ensure consistent braking performance
• Heat Resistance Testing: Fade resistance verified under high-temperature conditions
• Shear Strength Testing: Bonding integrity between friction material and backing plate verified
• Wear Warning Testing: Acoustic wear indior function verified
• Noise and Vibration Testing: Pad operation verified for minimal NVH (Noise, Vibration, Harshness)
• Wear Testing: Wear characteristics verified to ensure long service life
• Visual Inspection: 100% checked for defects, cracks, or surface imperfections
• Packaged Safely: Protected and securely packaged to prevent damage and contamination during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea