ISUZU Forged Alloy Steel Heat-treated Connecting Rod OEM Standard for 4JB1 4JB1T Engine
Price:
Negotiable
MOQ:
20 PCS
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
ISUZU Connecting Rod 8-94338648-0 8943386480 for 4JB1 4JB1T Engine — Forged Steel OEM Standard
Product Overview
ISUZU Connecting Rod with OEM numbers 8-94338648-0 / 8943386480 is a precision-engineered replacement designed for ISUZU 4JB1 and 4JB1T diesel engines. This component is a core moving part of the engine — the Connecting Rod Assembly — responsible for converting the reciproing motion of the piston into the rotational motion of the crankshaft.
Numbering Note: This product number is 8-94338648-0 / 8943386480, also listed as 894338-6480. This product also fits EC55B and DH55 construction equipment. Please verify the specific number based on actual vehicle or equipment configuration.
Working Principle
The connecting rod is a critical component connecting the piston to the crankshaft, installed inside the engine cylinder block. Its working principle includes:
- Power Transmission: During the engine's power stroke, combustion pressure pushes the piston downward, converting reciproing motion into rotational motion through the connecting rod.
- Force Conversion: The connecting rod withstands complex alternating loads — including compressive and tensile forces from combustion pressure, and inertial forces from piston reciproion.
- Lubriion & Cooling: The connecting rod features internal oil passages for lubriing the piston pin and big-end bearing via splash or pressure lubriion.
- Balance Function: The connecting rod, together with the crankshaft and piston, forms the engine's motion system — its mass and rigidity directly affect engine smoothness.
Failure Symptoms
Inspect immediately if any of these occur:
| Symptom | Probable Cause |
|---|---|
| Heavy "knocking" sound from engine (connecting rod bearing noise) | Worn big-end bearing or excessive clearance |
| Severe engine vibration; rough operation | Bent or broken connecting rod; loss of balance |
| Consistently low oil pressure | Worn connecting rod bearings causing increased oil leakage |
| Engine suddenly stalls or fails to start | Broken connecting rod; severe internal engine damage |
| Bent, twisted, or cracked connecting rod found during engine disassembly | Long-term overloading or material fatigue |
Verifiable Data
- Material Standard: Manufactured from High-Strength Forged Alloy Steel with heat treatment — ensures excellent fatigue resistance and durability.
- Precision Machined: Precision-machined to tight tolerances — ensures smooth piston motion and engine efficiency.
- Compatibility Verified: Fits both 4JB1 naturally aspirated and 4JB1T turbocharged engines.
- Appliion Range: Fits ISUZU NKR, NHR, NQR, ELF trucks, and EC55B, DH55 construction equipment.
- OE Cross-Reference Verified: Replaces OEM numbers 8-94338648-0 / 8943386480.
- Brand Certifiion: Supplied by IZUMI brand, ISO/TS16949 certified.
- Condition: Brand New — 100% quality inspected.
- Warranty: 3 months.
- Delivery Time: 15–20 days after deposit.
Product Specifiions
| Part Number: | 8-94338648-0 8943386480 | Product Name: | Connecting Rod |
| Car Model: | 4JB1 4JB1T | Engine Model: | 4JB1 4JB1T |
| Condition: | 100% Brand New | Size: | Standard |
| Weight: | Standard | Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe | ||
| Package: | Neutral Packing Or Make It As Requested | ||
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |
Vehicle & Engine Compatibility
Primary Vehicle Appliions:
| Brand | Model Series | Chassis | Compatible Engine | Notes |
|---|---|---|---|---|
| ISUZU | NKR | NKR55 | 4JB1 / 4JB1T | Light-duty truck |
| ISUZU | NHR | — | 4JB1 / 4JB1T | Light-duty truck |
| ISUZU | NQR | — | 4JB1 / 4JB1T | Medium-duty truck |
| ISUZU | ELF | — | 4JB1 / 4JB1T | Light-duty truck |
Extended Equipment Appliions:
| Brand | Equipment Model | Compatible Engine | Notes |
|---|---|---|---|
| ISUZU | EC55B | 4JB1 | Excavator |
| ISUZU | DH55 | 4JB1 | Excavator |
Primary Engine Appliions:
| Engine Model | Type | Primary Appliion |
|---|---|---|
| ISUZU 4JB1 | Naturally Aspirated | NKR / NHR / NQR / ELF series |
| ISUZU 4JB1T | Turbocharged | NKR / NHR / NQR / ELF series |
Important Fitment Warnings
- Number Confirmation: This product number is 8-94338648-0 / 8943386480. Verify the specific number on the original part before ordering.
- Set Replacement Recommended: Connecting rods should be replaced in sets (4 pieces) to maintain engine balance and consistency.
- Associated Components: When replacing connecting rods, it is recommended to also replace connecting rod bearings, piston pins, and piston rings.
- Installation Torque: Refer to ISUZU 4JB1 engine factory workshop manual for connecting rod bolt torque specifiions.
- Installation Orientation: Connecting rods have orientation marks — pay attention during installation.
- Professional Installation: Connecting rod replacement is a core engine overhaul procedure requiring complete engine disassembly and reassembly. Must be performed by a qualified engine repair technician.
Features & Benefits
High-Strength Forged Alloy Steel Construction
Excellent fatigue strength and durability for long-term reliable operation under high-compression, high-load conditions— suitable for 4JB1/4JB1T engines and NKR/NHR truck appliions.
Precision Machining & Tight Tolerance Control
Ensures smooth piston motion and engine efficiency — provides the perfect balance of strength, weight, and performance.
Heat-Treated for Fatigue Resistance
Significantly enhances fatigue resistance and service life — suitable for both naturally aspirated and turbocharged engines.
100% Factory Quality Inspection
Every piece undergoes strict quality inspection — ensures zero-defect delivery.
ISO/TS16949 Quality Management Certified
Internationally recognized automotive industry quality standard ensuring full-process quality control — supplied by IZUMI brand.
Broad OEM Cross-Compatibility
Replaces OEM numbers 8-94338648-0 / 8943386480 — fits NKR, NHR, NQR, ELF trucks and EC55B, DH55 equipment.
Flexible Supply (Small Orders Accepted)
Flexible MOQ with small quantity orders accepted — delivery time 15–20 days.
Quality Control & Verifiion
| QC Item | Inspection Method | Acceptance Criterion | Frequency |
|---|---|---|---|
| Connecting rod dimensional accuracy | CMM | OEM standard size ± tolerance | Batch sampling |
| Connecting rod weight | Precision scale | Standard weight ± tolerance | Batch sampling |
| Connecting rod parallelism/twist | Special gauges | Per ISO standard | Batch sampling |
| Material composition | Spectrometer | Per forged steel standard | Batch sampling |
| Material hardness | Rockwell/Brinell tester | Standard hardness range | Batch sampling |
| Visual inspection | Visual / Fluorescent penetrant | No cracks, casting defects, or burrs | 100% |
| ISO/TS16949 quality audit | Third-party certifiion body | Per ISO/TS16949 standard | Periodic audit |
Installation & Maintenance Recommendations
IMPORTANT SAFETY NOTICE: Connecting rod replacement is a core engine overhaul procedure requiring complete engine disassembly and reassembly. Must be performed by a qualified engine repair technician. Improper operation may cause serious engine damage or safety incidents.
Installation Guidelines (Reference Workshop Manual):
Preparation:
- Confirm engine model (4JB1 / 4JB1T) and part number (8-94338648-0)
- Prepare tools: Torque wrench, micrometer, connecting rod bolt installation tool
- Recommended to also prepare: Connecting rod bearings, piston pins, piston rings, cylinder head gasket
Removing Old Connecting Rods (Reference Steps):
- Remove the engine from the vehicle/equipment and place on an engine repair stand.
- Remove cylinder head and oil pan.
- Remove piston-connecting rod assemblies, mark each connecting rod with its cylinder number and orientation.
- Use a special tool to remove piston pins and separate pistons from connecting rods.
- Inspect old connecting rods for bending, twisting, or cracking.
Installing New Connecting Rods (Installation Sequence):
- Inspect new connecting rods: Check for casting defects, burrs, or cracks.
- Install piston: Install piston pin through piston and connecting rod small end; install snap rings.
- Install connecting rod bearings: Install bearings into the big end, noting orientation.
- Lubrie: Apply engine oil to bearings and piston pin surfaces.
- Install piston-connecting rod assembly: Install into the corresponding cylinder, noting orientation and marks.
- Install connecting rod cap: Install cap and torque bolts to specifiion (refer to ISUZU 4JB1 workshop manual).
- Check crankshaft rotation: Rotate manually — confirm smooth operation, no binding.
Post-Installation Checks (Mandatory):
- Rotation check: Rotate crankshaft manually — confirm smooth operation, no binding.
- Compression test: Perform compression test before starting — confirm even and standard cylinder pressures.
- Startup test: Start engine; check for abnormal noise.
Maintenance Schedule:
| Item | Interval | Notes |
|---|---|---|
| Oil and oil filter change | Every 5,000～10,000 km | Use API-standard diesel engine oil |
| Engine noise inspection | Each service | Inspect immediately if knocking detected |
| Connecting rod inspection | During engine overhaul | Check for bending, twisting, or cracking |
| Connecting rod replacement | During engine overhaul | Replace in sets (4 pieces) |
Packaging & Supply
| Packaging | Neutral box / Color box / Custom brand packaging |
| Quantity per package | 1 pc/box (standard shipment packaging) |
| Brand | IZUMI |
| Place of Origin | China |
| Customization Options | OEM custom packaging / neutral packaging / private labeling |
| Minimum Order Quantity | Small quantities accepted |
| Delivery Time | 15–20 days after deposit |
| Warranty | 3 months |
| Target Customers | Truck parts wholesalers, engine overhaul shops, construction equipment parts suppliers, fleet purchasers, export traders |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James