ISUZU King Pin Kit KP-234 45# Steel Construction Complete Kit with Bushings/Bearings/Seals OEM Standard for FORWARD FSR
Price:
Negotiable
MOQ:
20 PCS
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
ISUZU King Pin Kit KP-234 1-87830716-0 1878307160 for FORWARD FSR — 4.3kg OEM Standard
Product Overview
The ISUZU Steering Knuckle King Pin Kit, model KP-234, with OEM numbers 1-87830716-0 / 1878307160 and 1-87830614-0 / 1878306140, is a precision-engineered replacement designed for ISUZU FORWARD series and FSR series medium-duty trucks (since 1984). This complete overhaul kit contains king pins, bushings, thrust bearings, oil seals, gaskets, snap rings, and all necessary mounting accessories.
Numbering Note: This product is model KP-234, featuring two OEM numbers: 1-87830716-0 / 1878307160 and 1-87830614-0 / 1878306140. The corresponding model is MI-61H. Same-series KP-235 (MI-62H) fits different appliions. Please verify the specific number based on actual vehicle configuration.
Working Principle
The king pin is a core pivot component of the vehicle's front axle steering system, connecting the steering knuckle to the front axle I-beam. Its working principle includes:
- Steering Pivot: Serves as the rotation axis for the steering knuckle, allowing the wheel to pivot left and right for steering.
- Load Bearing: Withstands the vertical load at the front of the vehicle (vehicle weight and payload) as well as lateral and longitudinal forces during cornering.
- Friction Reduction: The king pin and bushings form a sliding bearing interface, lubried with grease for light, responsive steering.
- Precise Alignment: The king pin inclination directly affects caster angle, king pin inclination, and other alignment parameters for straight-line stability.
Failure Symptoms
Inspect immediately if any of these symptoms occur:
| Symptom | Probable Cause |
|---|---|
| Loose steering; excessive steering wheel free play | Worn king pin and bushings; increased clearance |
| Front wheel shimmy (steering wobble), especially at high speeds | Worn king pin causing alignment changes |
| "Clunking" metallic noise when turning or driving over bumps | Severely worn king pin/bushings or loss of lubriion |
| Uneven tire wear (excessive inner or outer edge wear) | Worn king pin causing wheel misalignment |
| Visual inspection shows torn dust boot or grease leakage | Worn/damaged dust boot; debris contamination accelerating wear |
Technical Specifiions
- Product Model: KP-234 / MI-61H
- Product Dimensions: 35mm * 199mm
- Net Weight: 4.3kg
- Material: 45# Steel — heat-treated for excellent wear resistance and fatigue strength
- Kit Contents: Includes king pins, bushings, thrust bearings, oil seals, gaskets, snap rings, and all necessary mounting accessories
- Parts Figure Number: 410-003
- HS Code: 870850000
- Quality Grade: High Quality
- Brand Certifiion: Manufactured under ISO/TS16949 automotive quality management system certifiion
- Condition: Brand New — 100% quality inspected
- Supply Capacity: 10000 sets/month
- Delivery Time: 5–8 working days
Vehicle Compatibility
Primary Appliions:
| Brand | Model Series | Chassis | Years | Notes |
|---|---|---|---|---|
| ISUZU | FORWARD | FSR | 1984+ | Medium-duty truck |
| ISUZU | FSR | FSR | 1984+ | Medium-duty truck |
| ISUZU | NPR | NPR | — | Light/medium-duty truck |
| ISUZU | NKR | NKR | — | Light-duty truck |
| ISUZU | ELF | NHR | — | Light-duty truck |
Extended Compatibility Note: This product (KP-234) is primarily designed for ISUZU FORWARD (FSR) series (since 1984). Same-series KP-235 (MI-62H) also fits FORWARD/FSR but with different OEM numbers. KP-236 (MI-65H) fits ISUZU GIGA (CVR, CXZ, EXD) heavy-duty trucks. Please verify the chassis code and year on the vehicle nameplate before ordering.
Important Fitment Warnings
- Number Confirmation: This product is model KP-234, featuring two OEM numbers 1-87830716-0 / 1878307160 and 1-87830614-0 / 1878306140. KP-235 (MI-62H) also fits FSR but with different numbers. Verify the specific number on the original part before ordering.
- Kit Contents: This is a complete kit including king pins, bushings, thrust bearings, oil seals, gaskets, snap rings, and all necessary mounting accessories. Confirm all components are present before installation.
- Lubriion Requirement: Apply sufficient high-temperature lithium grease to king pin and bushing contact surfaces during installation; ensure grease fitting is clear.
- Installation Torque: Refer to ISUZU factory workshop manual for king pin retaining bolt and steering arm bolt torque specifiions.
- Pair Replacement Recommended: King pins should be replaced in pairs (left and right) for consistent steering performance.
- Post-Installation Alignment: Wheel alignment is mandatory after king pin kit replacement — ensure caster angle, king pin inclination, and other parameters are correct.
- Professional Installation: The king pin is a critical steering system safety component requiring front axle disassembly and precision adjustment — must be performed by a qualified technician.
Features & Benefits
Complete Kit
Includes all necessary components — one-stop overhaul solution; eliminates delays from missing components.
Includes all necessary components — one-stop overhaul solution; eliminates delays from missing components.
45# Steel Construction + Heat Treatment
Excellent wear resistance and fatigue strength for long-term reliable operation under high-load steering conditions.
Excellent wear resistance and fatigue strength for long-term reliable operation under high-load steering conditions.
Precision-Machined Dimensions (35*199mm)
Ensures precise fitment with steering knuckle and front axle I-beam — direct OEM replacement.
Ensures precise fitment with steering knuckle and front axle I-beam — direct OEM replacement.
ISO/TS16949 Quality Management Certified
Internationally recognized automotive industry quality standard — ensures full-process quality control.
Internationally recognized automotive industry quality standard — ensures full-process quality control.
100% Factory Quality Inspection
Every piece undergoes strict quality inspection — ensures zero-defect delivery.
Every piece undergoes strict quality inspection — ensures zero-defect delivery.
Broad OEM Cross-Compatibility
Replaces OEM numbers 1-87830716-0 / 1878307160 and 1-87830614-0 / 1878306140 — fits FORWARD, FSR, NPR, NKR models.
Replaces OEM numbers 1-87830716-0 / 1878307160 and 1-87830614-0 / 1878306140 — fits FORWARD, FSR, NPR, NKR models.
Flexible Supply
MOQ 5 pieces, delivery 5–8 working days, supply capacity 10000 sets/month — meets diverse procurement needs.
MOQ 5 pieces, delivery 5–8 working days, supply capacity 10000 sets/month — meets diverse procurement needs.
Packaging & Supply
| Item | Detail |
|---|---|
| Packaging | Neutral packaging or customized per customer request |
| Quantity per package | 1 set/box (standard shipment packaging) |
| Product Net Weight | 4.3kg |
| Product Dimensions | 35 * 199 mm |
| Brand | ISUZU / OEM Standard |
| Place of Origin | China |
| Minimum Order Quantity | 5 pieces |
| Delivery Time | 5–8 working days |
| Supply Capacity | 10000 sets/month |
| Payment Terms | T/T, Western Union |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James