Rear Brake Wheel Cylinder MK356639 MK-356639 For Mitsubishi Fuso Canter FE/FG Series & Rosa Bus 4D31/4D34/4M42 — OEM Rear Left Hand (LH) Forward 1-1/4" Bore Cast Iron Drum Brake Cylinder
Price:
Negotiable
MOQ:
10 pcs
Delivery Time:
5-8 Work Days
Brand:
YIMI
Product Description
Rear Brake Wheel Cylinder MK356639 MK-356639 For Mitsubishi Fuso Canter FE/FG Series & Rosa Bus 4D31/4D34/4M42
Product Overview
The Rear Brake Wheel Cylinder with OEM number MK356639 (also listed as MK-356639) is a verified OEM-grade direct replacement for a wide range of Mitsubishi Fuso light and medium-duty trucks, including the Canter (FE/FG series) and Rosa buses.
Important Fitment Note: Part number MK356639 is the Rear Left-Hand (LH) Forward wheel cylinder. The matching Rear Right-Hand (RH) Forward counterpart is MK356640. For balanced braking performance, it is strongly recommended to replace brake wheel cylinders in pairs (both rear wheels).
| Part Number | MK356639 MK-356639 |
| Product Name | Rear Brake Wheel Cylinder |
| Car Model | Mitsubishi Fuso Canter FE/FG Series & Rosa Bus |
| Engine Model | Mitsubishi 4D31/4D34/4M42 |
| Condition | 100% Brand New |
| Material | High-strength cast iron with corrosion-resistant coating |
Failure Symptoms
If your rear brake wheel cylinder is failing, you may experience one or more of the following symptoms:
- Brake Fluid Leakage: Visible fluid seeping from the rear wheels or inside the brake drum
- Soft or Spongy Brake Pedal: Pedal feels unusually soft or goes to the floor
- Reduced Braking Performance: Vehicle takes longer to stop or requires increased pedal pressure
- Uneven Braking: Vehicle pulls to one side during braking
- Contaminated Brake Shoes: Brake fluid soaking into the brake shoes, causing reduced friction
A failing brake wheel cylinder can lead to reduced braking performance and potential brake failure — prompt replacement is essential.
Vehicle Compatibility
| Model | Chassis / Series | Years / Notes |
|---|---|---|
| Canter FE659 | FE659-11 | -- |
| Canter FE859 | FE859-11 | -- |
| Canter FE85P | FE85P-5 | 2005-2008 |
| Canter FE84B Hybrid | FE84B-5 | 05/2009 |
| Canter | FE53C, FE53E, FE533, FE548, FE562, FE566, FE567, FE568 | -- |
| Canter | FE63D, FE63E, FE648, FE652, FE658, FE659, FE668 | -- |
| Canter | FE7xx / FE8xx | -- |
| Rosa Bus | BE649, BE64DJ-5 | 1999-2011 |
| Rosa Bus | Rosa | -- |
Features & Benefits
OEM Specifiion
Guarantees factory-fit quality and performance
Guarantees factory-fit quality and performance
Precision 1-1/4″ (31.75mm) Bore
Delivers consistent hydraulic pressure for reliable braking
Delivers consistent hydraulic pressure for reliable braking
High-Grade Cast Iron Construction
Exceptional durability and heat dissipation
Exceptional durability and heat dissipation
Corrosion-Resistant Coating
Long-lasting durability in harsh environments
Long-lasting durability in harsh environments
Bleeder Screw Included
Complete replacement solution
Complete replacement solution
100% Pressure Tested
Guarantees leak-free performance
Guarantees leak-free performance
Quality Control
| QC Item | Verifiion Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 1-1/4″ bore diameter and mounting specifiions |
| Material Composition | Cast iron analysis for structural integrity and heat dissipation |
| Bore Surface Test | 100% surface testing for optimum sealing surface |
| Leakage Test | 100% hydraulic pressure test for zero fluid leakage |
| Durability Cycle Test | 500+ hour fatigue testing for long-term reliability |
Installation & Maintenance
Professional Installation Recommended
Replacing brake wheel cylinders is a critical safety procedure. It is strongly recommended to replace them in pairs for balanced braking performance.
Replacing brake wheel cylinders is a critical safety procedure. It is strongly recommended to replace them in pairs for balanced braking performance.
Installation Guidelines:
- Safely raise the vehicle and support it on jack stands
- Remove rear wheels and brake drums
- Disconnect brake line from old wheel cylinder
- Remove mounting bolts and old cylinder
- Install new cylinder with NEW mounting bolts
- Torque mounting bolts to manufacturer's specifiions
- Reconnect brake line and torque to specifiion
- Bleed brake system thoroughly
- Refill with fresh DOT 3 or DOT 4 brake fluid
Maintenance Schedule:
- Inspection: Every 50,000 km / 12 months
- Fluid Replacement: Every 2 years or 40,000 km
- Replacement: Immediately if failure symptoms appear
Packaging & Supply
- Packaging: Protective packaging to prevent shipping damage
- Package Contents: 1 Brake Wheel Cylinder (Bleeder screw included)
- Weight: Approx. 1.86 kg
- Warranty: 12 Months / 20,000 km
- Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yimi (Guangzhou) Automotive Parts Co, Ltd
Location
Unit 1313, Building 5, Changsheng DDP Fashion Center, No. 17 Dachi Road, Tancun, Shijing Subdistrict, Baiyun District, Guangzhou City.
Contact Person
James