Front Hub Outer Bearing HH506310 For ISUZU CVR FVR 1-09812084-0 1098120840

Features & Advantages 

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function

• Precision Tapered Roller Design: Efficiently handles both radial and thrust loads for reliable performance

• Heat-Treated Steel: Provides exceptional wear resistance and durability under heavy loads

• Precision-Ground Components: Rolling elements and races ground to exacting tolerances for smooth, quiet operation

• Supports Heavy Loads: Engineered to withstand the demands of heavy-duty commercial operation

• Restores Smooth Operation: Eliminates wheel wobble, noise, and vibration caused by worn bearings

• Extends Tire Life: Proper bearing function prevents uneven tire wear

• Direct Replacement: Simple installation during front axle or brake service

• Long Service Life: Built for durability in demanding commercial applications

• Essential Safety Component: Critical for safe, reliable vehicle operation 

Vehicle & Engine Compatibility

This front hub outer bearing is specifically designed for ISUZU heavy-duty trucks and compatible equipment. Common applications include:

• ISUZU CVR — Heavy-Duty Trucks

• ISUZU FVR — Heavy-Duty Trucks

• ISUZU CXZ — Heavy-Duty Trucks

• ISUZU CYZ — Heavy-Duty Trucks

• ISUZU CXZ21J, CXZ72J — Heavy-Duty Trucks

• ISUZU FSR — Medium to Heavy-Duty Trucks

Compatible Engine Models (Typical Applications):

• 6WF1 — Diesel Engine

• 10PE1 — Diesel Engine

• 6HK1 — Diesel Engine

Front Axle Application:

• Outer front wheel hub position

• Suitable for both left and right front hubs (identical part)

Installation Notes

Professional installation required. Proper bearing service is critical for safety:

1. Raise and secure the vehicle — Safely lift the front axle and support on jack stands

2. Remove the front wheels — Remove the front wheels, brake calipers, and hub assembly

3. Remove the old outer bearing — Carefully remove the old bearing from the hub using a bearing puller

4. Clean the hub bore — Thoroughly clean the hub bore, removing all old grease and debris

5. Inspect the hub and spindle — Check for scoring, pitting, or wear; repair or replace components as needed

6. Prepare the new bearing — Apply a thin coat of high-quality wheel bearing grease to the bearing

7. Install the new bearing — Press the new bearing into the hub bore using a proper bearing installation tool

8. Reinstall seals — Install new seals and components

9. Pack the hub with grease — Fill the hub cavity with the recommended grease

10. Install the hub assembly — Mount the hub onto the spindle

11. Adjust bearing preload — Tighten the bearing nut to the specified torque and set end-play per service manual

12. Install the locking device — Install the cotter pin or locking tab to secure the bearing nut

13. Reinstall brake components and wheels — Reinstall the brake calipers and wheels

14. Lower the vehicle — Lower the vehicle to the ground

15. Test operation — Test drive the vehicle and check for smooth operation and bearing noise

Quality Control

Packaging and Delivery

Inquiry