Oil Filter Assembly 8-97176074-2 8971760742 For ISUZU 100P-T TC Truck Diesel Engine

Features & Advantages 

• OE Quality: Manufactured to strict ISUZU dimensional and filtration specifications for perfect fit and function.

• High-Efficiency Filtration: Removes damaging contaminants down to specified micron ratings, protecting engine bearings and internal components.

• High Contaminant Capacity: Large filter surface area provides long service life and reliable performance between oil changes.

• Durable Construction: Robust housing withstands high oil pressure, vibration, and extreme temperatures.

• Proper Oil Flow: Engineered to maintain correct oil flow rate with minimal restriction, ensuring proper lubrication at all engine speeds.

• Anti-Drain Back Valve: Prevents oil from draining back into the pan, ensuring immediate oil pressure on start-up.

• By-Pass Valve: Integrated by-pass valve ensures oil flow continues even if the filter becomes clogged (where applicable).

• Restores Engine Performance: Eliminates oil starvation, reduces wear, and extends engine life.

• Direct Replacement: Simple installation – matches original filter mounting and thread specifications.

• Essential Maintenance Item: Critical for protecting your diesel engine investment. 

Vehicle & Engine Compatibility

This oil filter assembly is specifically designed for ISUZU light-duty trucks and commercial vehicles. Common applications include:

• ISUZU 100P-T (Light-Duty Trucks)

• ISUZU TC (Commercial Trucks / Utility Vehicles)

• ISUZU 4JB1 Engine (2.8L Diesel – commonly used in these models)

• ISUZU 4JA1 Engine (2.5L Diesel – commonly used in these models)

• Also compatible with various ISUZU models using the same engine and oil filter configuration

Installation Notes

Professional mechanic or DIY installation recommended:

1. Ensure engine is cool – Never work on the engine when it is hot to avoid burns.

2. Position a drain pan – Place a suitable container beneath the oil filter to catch used oil.

3. Remove the old filter – Use an oil filter wrench to loosen and remove the old filter assembly.

4. Clean the mounting surface – Wipe the filter mounting base clean; remove old gasket residue.

5. Lubricate the new gasket – Apply a thin coat of clean engine oil to the new filter gasket.

6. Install the new filter – Screw the new filter assembly onto the mounting base by hand until the gasket contacts the base.

7. Tighten the filter – Tighten an additional 3/4 to 1 turn by hand (do not use a wrench to avoid over-tightening).

8. Check for leaks – Start the engine and allow oil pressure to build; inspect the filter area for leaks.

9. Check oil level – Turn off the engine, wait a few minutes, and check the oil level; top up if necessary.

10. Dispose of old filter – Drain and dispose of the old filter and used oil in accordance with local regulations.

Quality Control

Packaging and Delivery

Inquiry