Front Right ABS Wheel Speed Sensor 8-98219393-0 8982193930 8-98006186-0 8980061860 For ISUZU NPR NPR6SN NQR NNR NQR75 4HK1 5.2L Diesel — OEM Direct Fit

The Front Right ABS Wheel Speed Sensor with OEM numbers 8-98219393-0 (also listed as 8982193930, 8-98006186-0, 8980061860) is a verified OEM-grade direct replacement for ISUZU light and medium-duty commercial trucks. This critical component monitors wheel rotational speed and transmits data to the ABS control module to prevent wheel lock-up during braking.

• OEM Specification — Verified by ISUZU OEM part numbers
• Front Right (RH) Position Specific — Confirmed for ISUZU NPR, NQR, NNR, and NQR75 models
• Verified OEM Fitment — Confirmed for ISUZU NPR6SN (4HK1 5.2L) and compatible models
• Net Weight 9.52 oz (approx. 270 g) — Verified by supplier catalog specification
• OEM Cross-Reference Verified — Interchangeable with 8-98006185-0 (Left Front counterpart) and 8980061870
• Critical Safety Component — Provides essential wheel speed data for ABS functionality

If your front wheel speed sensor is failing, you may experience one or more of these symptoms:

• ABS Warning Light — Illuminates on the dashboard
• Loss of Anti-lock Braking — System becomes inoperative, reverting to standard braking
• Erratic or Pulsating Brake Pedal — Abnormal pedal behavior or unnecessary ABS engagement
• Speedometer Malfunction — Erratic or non-functional speedometer readings
• Traction Control / Stability Control Issues — TCS and ESC may be disabled or malfunction
• Diagnostic Trouble Codes (DTCs) — Codes such as C0035-C0050 or P0500 may be stored

• Safely raise the vehicle and support it on jack stands
• CRITICAL: This is the Front Right (RH) sensor — the LH counterpart is 8-98006185-0 / 8980061850
• Quantity Required: 1 per vehicle (for the front right wheel)
• Inspect sensor mounting location for debris, corrosion, or damage
• Inspect ABS tone ring for damage or missing teeth
• Safety First: Ensure vehicle is securely supported on jack stands

1. Safely raise vehicle and support on jack stands
2. Disconnect negative battery terminal
3. Locate front right wheel speed sensor on inner frame rail
4. Disconnect electrical connector from sensor
5. Remove mounting bolt(s) securing sensor to frame or hub
6. Carefully remove old sensor and clean mounting surface
7. CRITICAL: Install new sensor with correct orientation and routing
8. Torque mounting bolt to manufacturer's specified settings
9. Reconnect electrical connector until it clicks
10. Reconnect negative battery terminal
11. Start engine and verify ABS warning light extinguishes
12. Test drive to verify proper ABS operation

• Inspection: During routine servicing or if ABS warning light illuminates
• Replacement: Immediately if failure symptoms appear
• Note: A failing sensor disables ABS system, increasing stopping distances and risk of wheel lock-up