HDPE Electro Fusion Tape Shrink Sleeves Product Line for HDPE Structured Wall Spiral Pipe

                                 HDPE Electro Fusion Tape Shrink Sleeves Product Line for HDPE Structured Wall Spiral Pipe

Engineered by QINGDAO HUASHIDA PIPE-WELDING TECHNOLOGY CO., LTD
For leak-proof, life-long joints on HDPE structured-wall spiral pipes

1.Large-diameter HDPE structured-wall spiral pipes (ID 200-3500 mm) are the backbone of modern storm-water, drainage and marine-outfall systems. Yet their profiled outer wall makes conventional butt-fusion and electro-fusion couplers unreliable:  
- uneven surface → poor heat transfer  
- gap between profiles → cold zones & leakage paths  
- field mis-alignment → long installation times & call-backs 

Huashida's answer: a factory-integrated Electro-Fusion 

TAPE SHRINK SLEEVE** that shrinks, melts and anchors itself to the pipe profile in one automatic cycle—creating a 100 % seal that lasts as long as the pipe itself.

2. What It Is  A tri-layer, co-extruded "active sleeve":  
1. Outer radiation-crosslinked PE sleeve – shrinks ≥ 30 % to hug the pipe profile  
2. Middle layer of Ni-Cr wire mesh – delivers uniform, controllable fusion energy  
3. Inner reactive E-fusion adhesive – melts & flows into pipe corrugations, forming a fusion-bonded, monolithic joint

Simply slide the pre-fabricated sleeve over the bell-spigot, connect the 4 mm plug, press START on the Huashida programmable junction box—15-25 minlater the joint is cooled, sealed and ready for back-filling. 

✅ Fits every profile – ring, T-rib, hollow-square, ultra-rib, Krah ...  
✅ DN 200-3500 mm – one production line, any diameter on request  
✅ No sanding, no primer, no open flame – safest field install  
✅ Tensile ≥ 18 MPa, peel ≥ 120 N/cm – exceeds ISO 21307 & DVS 2207  
✅ Pressure-rated up to 0.5 MPa – perfect for non-pressure & low-pressure lines  
✅ UV-stable, seawater-resistant, -40 °C to +60 °C** – designed for 50-year life  

3. One-Stop Product Line – Supplied by Huashida  
- Automatic tape-winding & wire-embedding line 10-120 mm sleeve width  
- Cross-linking electron accelerator** (3 MeV, 50 kGy) for shrink-memory  
- Co-extrusion adhesive coating heads** 500 kg h⁻¹  
- Vision-controlled cutting & bevelling station  
- In-line spark tester & ultrasonic thickness gauge – zero-defect guarantee  
- Programmable electro-fusion control boxes 220 V / 380 V, data-logger included  

Output: 1 000 000 sleeves yr⁻¹ (DN 800) – turnkey installation, training, formulation and after-sales service.  

4. Green & Cost-Smart  
- 30 % material saving vs. thick conventional wrap sleeves  
- 50 % faster install– one operator, no heavy equipment  
- Scrap < 1 %– fully recyclable PE  
- Eliminates post-installation repairs – real ROI on every project 

5. Global Track Record  
- 1 200 km Shanghai flood-relief culvert Ø 2 400 mm  
- Jakarta sewage tunnel ID 3 000 mm – marine out-fall  
- Poland Krah storm-water system DN 1 000-1 600 mm  
- Brazil ethanol plant process water DN 200-800 mm  

All projects inspected 100 %, zero leakage reported.  

 6. Let's Connect  
Send us your pipe profile drawing → we will ship custom Electro-Fusion Tape Shrink Sleeves in 15 days, with installation tools, QC software and on-site training.  

Huashida – Welding the future of large-diameter HDPE, one smart sleeve at a time.