3-9900.397 3-9900.393 Georg Fischer Batch Module type 9900

Product Description:

The 3-9900.397 Batch Module is only compatible with the 3-9900-1P Panel Mount Transmitter (Generation II or greater). The Panel Mount unit can be installed in the optional Wall Mount Accessory 3-9900.392 (159 001 700) for fi eld mount installation, or with either of the Rear Enclosure Kits, 3-9900.399-1 (159 001 8340) Hinged Cover, or 3-9900.399-2 (159 001 835) Flat Cover.

Features:

Install the Batch Module and Relay Module to the 9900 prior to mounting the 9900 transmitter. Complete all wiring to terminal plugs prior to installing these plugs into the 9900, Batch Module or Relay Module. The Batch module plugs in and attaches with a screw.

1. Remove terminals from the receptacle of each plug-in module prior to installation.
2. It may be helpful to use a standard screwdriver to gently pry removable terminals away from the receptacle on the plug-in modules.
3. Strip 10 mm to 12 mm (0.4 in. to 0.5 in.) of insulation from wire tips and tin bare ends to eliminate fraying.
4. Insert wire tip or ferrule completely into the terminal and secure with the screw.

• Terminals accept up to 14 AWG wire.
• Do not allow any AC leads that may be connected to the internal relays to come in contact with low voltage wiring