AC-80 58kW Prime 64kW Standby DCEC Diesel Generator | AikePower Factory Supply
AikePower AC-80 is a medium-duty industrial diesel generator powered by DCEC 4BTA3.9-G11 engine, designed for continuous prime power and emergency standby power supply. It delivers 72.5kVA (58kW) prime power and 80kVA (64kW) standby power at 50Hz 1500RPM, widely used for commercial buildings, factories, construction sites, remote off-grid areas and Philippine power station backup projects.
- Power Unit: DCEC 4BTA3.9-G11 four-cycle turbocharged engine, water-air intercooled
- Alternator Optional: Stamford / Leroy Somer / Mecc Alte brushless single bearing alternator, IP23, Class H insulation
- Complete base skid with heavy-duty vibration isolators for low vibration operation
- Full filtration system: Dry air filter, fuel filter, oil filter
- Standard main circuit breaker + integrated control cabinet
- Dual 12V starting batteries with mounting rack & complete cables
- Full exhaust assembly: Flexible ripple pipe, exhaust siphon, flange and industrial silencer
- Max ambient working temperature up to 50℃, applicable for tropical Southeast Asian climate
- Max operation altitude ≤1500m, perfect for mountain & island power projects
Water jacket preheater, water separator, oil preheater, external battery charger
Anti-condensation heater, permanent magnet generator, winding temperature sensor
Daily integrated fuel tank, external large fuel tank, auto fuel filling system, fuel level sensor monitor
Standard rainproof canopy, low-noise rental silent container, mobile transport chassis
DSE6020 basic AMF panel, DSE7320 advanced auto mains failure controller, DSE8610 multi-unit parallel synchronizing panel, ATS auto transfer switch, ABB circuit breaker
380/220V, 415/240V, 440/254V for global market matching
| Item | Specification |
|---|---|
| Frequency | 50Hz |
| Rated Speed | 1500RPM |
| Prime Power | 72.5KVA / 58KW |
| Standby Power | 80KVA / 64KW |
| Rated Voltage | 400/230V (3P4W Y connection) |
| Phase | 3 Phase |
| Power Factor | 0.8 lagging |
| 100% Load Fuel Consumption | 17.6L/Hr |
| 75% Load Fuel Consumption | 13.2L/Hr |
| 50% Load Fuel Consumption | 9.1L/Hr |
| Max Working Altitude | ≤1500m |
| Max Ambient Temperature | ≤50℃ |
| Engine Parameter | Data |
|---|---|
| Manufacturer & Model | DCEC 4BTA3.9-G11, 4-stroke inline 4 cylinder |
| Air Intake | Turbocharged, water-air cooling |
| Fuel Control | BYC mechanical pump / electronic governor optional |
| Displacement | 3.9L |
| Bore * Stroke | 102mm * 120mm |
| Compression Ratio | 17.3:1 |
| Rated Rotation Speed | 1500rpm |
| Max Standby Engine Power | 80KW |
| Governor | Electronic governor standard |
| Intake Air Flow | 70L/sec |
| Exhaust Gas Flow | 134L/sec |
| Exhaust Temperature | 548°C |
| Max Exhaust Back Pressure | 10kPa |
| Max Intake Restriction | 6.2kPa |
| Total Engine Oil Capacity | 10.9L |
| Oil Consumption Rate | <4g/kWh |
| Engine Coolant Volume | 8.3L |
| Thermostat Working Range | 83℃–95℃ |
| Max Allowable Water Temp | 104°C |
| Alternator Item | Technical Data |
|---|---|
| Brand & Model | Stamford UCI 224F1 |
| Phase & Wiring | 3 Phase, 4 Wire Y-type |
| Bearing Structure | Single bearing |
| Protection Class | IP23 |
| Excitation Mode | Brushless self-exciting |
| Insulation / Temperature Rise | Class H / H |
| TIF / THF | <50 / <2% |
| Steady State Voltage Regulation | ≤±1% |
| Rated Capacity | 72.5KVA |
| Efficiency | 89.9% |
| Cooling Air Flow | 0.216m³/s |
| Size & Weight | Open Frame Genset | Soundproof Canopy Genset |
|---|---|---|
| Length (L) | 1855mm | 2500mm |
| Width (W) | 900mm | 1070mm |
| Height (H) | 1650mm | 1800mm |
| Total Gross Weight | 1190kg | 1500kg |
Standard equipped for single generator automatic mains failure operation:
- Backlit LCD icon display for real-time engine speed, frequency, voltage, running hours, warning & shutdown alarms
- Complete engine over-speed, over-temperature, low oil pressure, over-current protection
- Support manual / auto start mode; programmable via front panel or DSE PC software
- Rich digital input & output ports for peripheral expansion
Built-in USB, RS232, RS485 communication ports, remote PC monitoring, real-time mains supply detection, extended fault event recording, reduce engine wear via intelligent load control.
Support synchronous operation of up to 32 generator units, automatic load sharing, centralized fault alarm with LCD, LED indicator and audible buzzer, stores 250 historical event logs for maintenance traceability.
- Generator Set Whole Machine: ISO 8528, CE
- Engine: ISO 3046, BS 5514, DIN 6271
- Alternator: BS EN 60034, IEC34, NEMA MG1-32, VDE 0530, CSA C22.2-100, AS1359
Every AikePower AC-80 genset undergoes strict full factory testing before delivery. Our standard warranty takes effect based on the earliest of three conditions:
- 15 months from factory shipment date to buyer
- 12 months after on-site installation completion
- 1000 total accumulated running hours
Global spare parts supply & local after-sales service supported by AikePower overseas distributors. Specifications subject to change without prior notice for technical optimization.
If you need silent canopy, mobile trailer, parallel system, ATS switch or special voltage configuration for your Philippine power project, send your detailed demand to our sales manager. We provide one-stop customized generator solution, factory direct price, fast delivery and global after-sales support.
Our professional engineer team will reply within 24 hours for Southeast Asia power projects.
Contact Us NowGet in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.