Explosion proof Semi automatic Drum,Pail and Can liquid Filling Machine for hazardous liquid

Standard above-surface explosion-proof liquid filling machine, filling on surface of drum, apply a variety of liquid materials. Unique design of filling device is easy to operate, filling fast, accurately. When in operation, the operator just simply align the bunghole just below the filling valve, pressing start button on handle, the machine will automatically tare out and start accurately two speed filling. The filling ends and filling valve automatically gets outside of drum, drip collecting at bottom of nozzle. Drum is removed and capped manually.

Features of explosion proof controlling system:

1. Displays both weight and targets of the moment, anticipate or physically measurement information at the same time with dual display.
2. 200 times/sec A/D conversion speed with 1/1,000,000 internal resolution
3. 1/60,000 display resolution
4. 14 bit LED display,8 status LED.
5. Full liquid filling controller.
6. Get rid of tare automatically.
7. Refined and glancing feeding mode and pre-compensation.
8. Dynamic,static anti-tremble software pack.
9. Store 30 prescriptions permanently and can be printed as list.
10. Auto-printing,accumulation printing,prescription printing.
11. Alarm on transcending difference, time-lapse or pause the next step.
12. Date,time,accumulation power-loss protection.
13. Promote accuracy with slow feeding with steps, frequency and extent correction.
14. Controllers with perfect self-diagnosis, especially important output connectors. Serial port, input/output port testing.
15. RS－232,printing port, relay I/O module are standard equipped,RS－422 or RS－485 communication module and 4～20mA or 0～10V analog output module are optional.
16. Explosion Proof Grade: EXdia II BT4

Main parameters

• Max capacity: 300kg
• Min division: 0.1kg
• Filling Accuracy: ±0.1%
• Filling Speed: about 40~60 Drum/hr(based on the feeding speed)
• Explosion Proof Grade: ExdiaIIbT4(only for explosion-proof type)
• Waterproof grade: IP65
• Power: AC220/50Hz(supplied by customer)
• Air supply: 0.4-0.6Mpa(supplied by customer)
• Temperature: -10℃- 40℃
• Control mode: 2-shift control
• Filling mode: inserting filling, above-surface filling
• Platform: 700×700mm. Roller: stainless steel
• Empty drum platform: 700mm×1000mm. Roller: stainless steel
• Storage platform: 700mm×1000mm. Roller: stainless steel
• filling valve pipe: SUS304 stainless steel and Teflon(SUS 316L is optional)