High quality Automatic Roll Slitting Machine

1. Technique Data

Machine Speed : 110m/min

Max material diameter : 1300mm

Feeding Diameter : 600 mm

Rewinding diameter : 450mm

Slitting accuracy :±0.1mm

Voltage:380V 50HZ

Main Motor Power :5.5kw (2 motor power)        

Total Power: 8kw    

Raw material Max hole diameter: 3”

compress air source:(0.4-0.6)Mpa(customer-owned)

Finished products Min. Width by standard slitting :25MM

size :300X170X200 cm

Weight : 2.2T

2 Machine advantage 

Purpose: This machine is suitable for slitting packaging films, PET, OPP, CPP, PE, PS, BOPP OPP PO and computer anti-counterfeiting labels, electronic computers, film rolls, films and various materials after printing. Features:

1. Main machine part:

1. The main machine structure of the equipment adopts steel parts and steel plate structure (steel plate parts are secondary processing and finalized)

2. The main shaft drive roller is made of seamless steel pipe. After tempering, surface hardening, plating, and dynamic balancing processing

3. The main shaft drive main pressure roller is a rubber roller (nitrile rubber)

4. The material guide roller is a metal roller (aluminum alloy) and a rubber roller (nitrile rubber)

5. The main machine and the material collection drive mode are synchronous wheel and synchronous belt drive

2. Discharging mechanism part:

1. The discharging mechanism is a one-piece shaftless automatic loading and unloading mechanism.

2. Install movable support, the moving device is linear guide

3. The material unwinding adopts shaftless air pressure lifting, which effectively saves labor and is easy to operate

4. Equipped with 1 set of deviation adjustment device, which can be fine-tuned left and right, front and back through the hand wheel

5. The unwinding tension actuator is a magnetic powder control device

6. The deviation correction adopts the bat technology configuration system to achieve the edge and line effect of the material

3. Rewinding mechanism part:

1. The material rewinding shaft is equipped with a three-inch air expansion shaft or 2 slip-type rotating shafts, and the tension is controlled by the servo motor

2. The locking method adopts pneumatic control

3. The rewinding tension is controlled by the servo motor

4. The rewinding roller can be customized according to customer requirements, and the rewinding roller rubber roller is a two-way flattening roller

5. The cutter is pneumatically controlled, equipped with 10 cutter holders, manual pneumatic (10 flat knives)

6. Equipped with 1 set of waste blowing device