automatic sheet feed die cutting machine
Price:
$20,000.00/sets >=1 sets
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
DAPENG
Product Description
Products Description
ITEM NO. | Capacity | table-board underneath size | Press base size | Table height | HOSE Power | spacing max |
TON | mm | mm | mm | HP | mm | mm |
DP650P | 40 | 650*600mm | 650*600 | 800 | 11 | 100 |
max range | accuracy | Machine size | Packing size | CBM | weight | Gross weight |
100mm | ± 0.03mm | 1420X1620X1900mm | 150X165X237cm | 5.87 M3 | 4.5 ton | 4.6Ton |
FUNCTIONAL CHARACTERSTICS
with lower bloster can be automatically push in and out , which more safe operation and precise position
Electronic positioning, precision and accurate,
and the precision and accuracy can be controlled in 0.01 to 0.03 mm,
push board back and forth precision can be controlled in 0.02 to 0.05 mm
There is shockproof board installed at under-chassis , therefore ,
the machine body is stable and reliable
Applies to punch electronic materials such as aluminum foil ,PET, protective film
and EVA, cardboard , jigsaw puzzle and other toys etc material die cutting
PLC + man-machine automatic programming control ,oil system adopts integrated control,
and there is photoelectric protection
with lower bloster can be automatically push in and out , which more safe operation and precise position
Electronic positioning, precision and accurate,
and the precision and accuracy can be controlled in 0.01 to 0.03 mm,
push board back and forth precision can be controlled in 0.02 to 0.05 mm
There is shockproof board installed at under-chassis , therefore ,
the machine body is stable and reliable
Applies to punch electronic materials such as aluminum foil ,PET, protective film
and EVA, cardboard , jigsaw puzzle and other toys etc material die cutting
PLC + man-machine automatic programming control ,oil system adopts integrated control,
and there is photoelectric protection
Configuration Detail
l PLC 1 Set Mitsubishi
l Touch Screen 1 Set Shanghai EV
l Safety Photoelectric 1 Set Taiwan
l Automatic Depth Adjustment Motor 1 Set Taiwan
l Main Motor （ 7.5KW-4） 1 Set QL Taiwan
l Oil Pump 1 Set Danxin Taiwan
l Magnetic Valve 1 Group Danxin Taiwan
l Main engine Oil Cylinder 1 Set Self-production
l Feeding Oil System Cylinder 1 Set Self-production
l Air Cooling System 1 Set Self-production
l Oil Seal 1 Set Japan
l Feed Plate Slippery Course 2 Bar HIWINSH
l Pneumatic die clamping.
l Touch Screen 1 Set Shanghai EV
l Safety Photoelectric 1 Set Taiwan
l Automatic Depth Adjustment Motor 1 Set Taiwan
l Main Motor （ 7.5KW-4） 1 Set QL Taiwan
l Oil Pump 1 Set Danxin Taiwan
l Magnetic Valve 1 Group Danxin Taiwan
l Main engine Oil Cylinder 1 Set Self-production
l Feeding Oil System Cylinder 1 Set Self-production
l Air Cooling System 1 Set Self-production
l Oil Seal 1 Set Japan
l Feed Plate Slippery Course 2 Bar HIWINSH
l Pneumatic die clamping.
Application
Application
Applies to punch electronic materials such as aluminum foil ,PET, protective film
and EVA, cardboard , jigsaw puzzle and other toys etc material die cutting or kiss cutting in all shapes.
and EVA, cardboard , jigsaw puzzle and other toys etc material die cutting or kiss cutting in all shapes.
kiss cutting sample show
plastic cutting with kiss cutting
large die cutting area
gasket full cutting
foam EVA sponge kiss cutting
Installation Instructions
Caution when use machine :
1. Please use the correct voltage, input
voltage should be within the error range of plus or minus 10V and ensure machinery is properly grounded to prevent leakage caused by mechanical damage.
2, on the machine to make any adjustments, be sure to turn off the power and unplug to maintain security, do not let the child and
non-operating personnel close to avoid danger.
3, the computer box with an air gun to clean when blowing dust, do not have water, gas spray, if have, you please drying air
compressor, turn on the water treatment
4, where the weather is cold, inside the machine may therefore have frozen yellow oil , at room temperature and added lubricating
oil at lubricating position.
5, the machine is placed away from the wall behind the position of about 1M, left and right sides of the space must be left
maintenance.
6, the need to regularly check for chassis lubrication system normal operation
7, the device used to replace the hydraulic oil once a month, later replaced once a year
8, two-handed operation provides a serious warning when the factory machine operator, while working carefully hand into the die
cutting area
voltage should be within the error range of plus or minus 10V and ensure machinery is properly grounded to prevent leakage caused by mechanical damage.
2, on the machine to make any adjustments, be sure to turn off the power and unplug to maintain security, do not let the child and
non-operating personnel close to avoid danger.
3, the computer box with an air gun to clean when blowing dust, do not have water, gas spray, if have, you please drying air
compressor, turn on the water treatment
4, where the weather is cold, inside the machine may therefore have frozen yellow oil , at room temperature and added lubricating
oil at lubricating position.
5, the machine is placed away from the wall behind the position of about 1M, left and right sides of the space must be left
maintenance.
6, the need to regularly check for chassis lubrication system normal operation
7, the device used to replace the hydraulic oil once a month, later replaced once a year
8, two-handed operation provides a serious warning when the factory machine operator, while working carefully hand into the die
cutting area
Details Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Kunshan Dapeng Precision Machinery Co.,Ltd
Location
Block 24 , No. 511, North of Huangpujiang Road ,215314 Zhoushi Town, Kunshan City, Suzhou City, Jiangsu Province
Contact Person
Phoebe