IEC 62196-2 Type 2 Female Ev Charging Socket Vehicle Side Inlet/ 16/32A 250V, 1 Phase or 415V 3 Phase Male Socket
IEC 62196-2 Type 2 Female Ev Charging Socket Vehicle Side Inlet/ 16A 32A 250V, 1 Phase or 415V 3 Phase Male Socket For EV Side/Socket With Shutter Obturator Ac Type 2 Connector Car Accessories
 |
16/32A Type 2 EV AC female socket for station side |
Model selection and the standard wiring |
|
Rated current: 16/32A |
16A Single phase; 3 X 2.5mm² + 2 X 0.5mm² |
|
|
Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option |
16A Three phase: 5 X 2.5mm² + 2 X 0.5mm² |
|
|
Operation Temp.:-30℃ ~ + 50℃ |
32A Single phase;3 X 6mm²+ 2 X 0.5mm² |
|
|
IP protection class: IP 54 ( working condition) |
32A Three phase;5 X 6mm²+ 2 X 0.5mm² |
|
|
Product description: This IEC62196 Type 2 AC EV Female Socket is used at the type 2 AC charging station, as a electric outlet for model 3 charging cable to charge the electric cars. |
|
 |
16/32A Type 2 EV AC Charging male socket for EV side |
Model selection and the standard wiring |
|
Rated current: 16/32A |
16A Single phase; 3 X 2.5mm² + 2 X 0.5mm² |
|
|
Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option |
16A Three phase: 5 X 2.5mm² + 2 X 0.5mm² |
|
|
Operation Temp.:-30℃ ~ + 50℃ |
32A Single phase;3 X 6mm²+ 2 X 0.5mm² |
|
|
IP protection class: IP 54 ( working condition) |
32A Three phase;5 X 6mm²+ 2 X 0.5mm² |
|
|
Product description: This Type 2 AC Charging Socket Vehicle Side, also Know as AC Charging Inlet Socket, can be installed on the Type 2 Electric Vehicle. |
|
 |
16/32A Type 2 EV AC Charging Inlet Socket Vehicle Side |
Model selection and the standard wiring |
|
Rated current: 16/32A Three Phase |
16A Single phase; 3 X 2.5mm² + 2 X 0.5mm² |
|
|
Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option |
16A Three phase: 5 X 2.5mm² + 2 X 0.5mm² |
|
|
Operation Temp.:-30℃ ~ + 50℃ |
32A Single phase;3 X 6mm²+ 2 X 0.5mm² |
|
|
IP protection class: IP 54 ( working condition) |
32A Three phase;5 X 6mm²+ 2 X 0.5mm² |
|
|
Product description: This Type 2 AC Charging Inlet Socket Vehicle Side, also Know as AC Charging Inlet Socket, can be installed on the Type 2 Electric Vehicle. |
|
IEC Type 2 Connector
The IEC 62196 Type 2 connector (often referred to as Mennekes for the company that designed it) is used for charging electric vehicles, mainly within Europe, as it was declared standard by the EU. Based on widespread red IEC 60309 three phase plugs with five pins, which come in different diameters according to maximum current (most common are 16 A and 32 A), a single size was selected, as maximum possible power will be communicated to the car via two additional communication pins and by a simple resistor coding within the cable. The onboard charger inside the car has to limit the current accordingly.
The connector is round with a flat top edge. The initial design specification comes with an output electrical power of 3-50 kW for charging battery electric vehicles using single-phase (230V) or three-phase (400V) alternating current (AC). In general, the typical maximum power is 32A 7.2 kW using single-phase AC and 22 kW using three-phase AC. The plug has an opening on the side so that both the car and the charger can automatically lock the plug. To prevent unnecessary charging interruptions or cable theft.
Top quality at the best price
Maximum efficiency
Get maximum charging performance with a superior quality cable (poor quality cables increase losses, lengthen charging times and consume more energy).
Long life
The high quality of the materials and the robustness of the connectors used ensure a long service life of the charging cable under all operating conditions.
Individually tested
Each charging cable is tested by e-Station before shipment to ensure the absence of any defects and thus avoid potential problems with the electric vehicle and/or charging station.
Indoor and outdoor use
The charging cable can be used in all weather conditions, indoors or outdoors, without affecting the functional and safety features.
Different lengths available
The wire length and end of treatment are according to the customer requirement
Color Black, white, custom color accepted
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.