Type 2 IEC62196-2 Connector Male Socket/Inlet For EV Side16/32A 250V Single Phase or 415V Three Phase With Lid, (Electromagnetic Lock optional)  Car Accessories

	16/32A Type 2 EV AC Charging male socket for EV side	Model selection and the standard wiring
	Rated current: 16/32A	16A Single phase; 3 X 2.5mm² + 2 X 0.5mm²
	Rated voltage: 250V AC, Single Phase or 415V AC, Three Phase for option	16A Three phase: 5 X 2.5mm² + 2 X 0.5mm²
	Operation Temp.:-30℃ ~ + 50℃	32A Single phase;3 X 6mm²+ 2 X 0.5mm²
	IP protection class: IP 54 ( working condition)	32A Three phase;5 X 6mm²+ 2 X 0.5mm²
	Product description: This Type 2 AC Charging Socket Vehicle Side, also Know as AC Charging Inlet Socket, can be installed on the Type 2 Electric Vehicle.

IEC 62196-2 (Type 2 Mennekes) Male Socket/Inlet(EV Side) 16/32A With Lid

This IEC62196 Type 2 AC EV Female Socket is used at the type 2 AC charging station .The Type 2 (Mennekes) inlet, is an industry-standard vehicle connector for convenient charging of Plug-in Hybrid Electric Vehicles (PHEV) and Electric Vehicles. Type 2 inlets and plugs support Level 1 and Level 2 charging standard of Europe/ Australia and increasingly global standards

►Meets IEC 62196-2 2010 SHEET 2-llb (Mennekes, Type 2) EU European standard

►Nice shape and easy to use, protection class IP54 (in mated conditions)

which provides protection against dust and against the ingress of water splashing from all sides. When connected, the socket protection is also at the IP54 level.

►Cord Length: Free end

►Adapt the socket type: IEC 62196-2

Specification:​

•Rated current: 16/32A

•Operation voltage: 240/415V AC(3 Phase)

•Insulation resistance: > 1000MΩ (DC500V)

•Terminal temperature rise: < 50K

•Withstand voltage: 2000V

•Vibration resistance: Meet JDQ 53.3 requirements

•Contact impedance: 0.5mΩ Max

•CE & TUV approved

Materials:

♦Shell Material: Thermo Plastic ( Flame retardant grade UL94 VO)

♦Contact Pin: Copper alloy, silver plating

♦Sealing gasket: rubber or silicon rubber

Recommended Cable: 

♦Cable: (TUV,UL Rated)

♦32A: 3*6.0mm2+2*0.5mm2

♦Cord length: Free End, 3m(9.8ft), 5m(16.4ft)The wire length and end of treatment are according to the customer requirement