108mm - 323mm Drilling Rig Tools Odex Hammer Bits For Water Well Drilling Projects
108 - 323mm Odex Hammer Bits Drilling Rig Tools for Water Well Drilling Projects
Product Description
Odex hammer, as a professional equipment in the field of drilling, is specially designed for drilling short holes and small and medium - sized grouting holes in water wells, geothermal wells, buildings, dams and port projects. It adheres to the design principles of simple structure, convenient operation, reliable quality and long service life, ensuring easy follow - up of casing and simplifying equipment operation. The Odex hammer allows drilling tools to be recovered, which not only improves operating efficiency but also extends equipment life, making it an ideal choice for precise and efficient drilling tasks.
The Odex hammer is a drilling equipment focused on drilling short holes and small and medium-sized grouting holes in water wells, geothermal wells, buildings, dams and port projects. Its design principle is to simplify the casing follow - up process while making the equipment and operation simpler and easier.
Technical Parameters
| Outer Dia. of Casing Tube | Inner Dia. of Casing Tube | Reamed Dia. | Min. Inner Dia. of Casing Shoe | Hammer Type | Drill Pipes |
| mm | mm | mm | mm | / | mm |
| 108 | 93-99 | 118 | 86 | 3.5” | 76 |
| 114 | 101-103 | 127 | 91 | 3.5” | 76 |
| 127 | 114-116 | 136 | 101 | 3.5” | 76 |
| 140 | 124-127 | 152 | 117 | 4” | 76 |
| 146 | 127-132 | 154 | 117 | 4” | 76 |
| 168 | 149-155 | 184 | 140 | 5” | 76,89 |
| 178 | 159-165 | 194 | 150 | 5” | 76,89 |
| 193 | 173-180 | 206 | 166 | 6” | 89,114 |
| 219 | 199-206 | 234 | 193 | 6” 8” | 89,114 |
| 245 | 224-231 | 260 | 210 | 8” | 114 |
| 273 | 251-257 | 300 | 241 | 8” | 114,127 |
| 323 | 303-313 | 340 | 275 | 8” 10” | 114,127 |
Machine Operating Steps
The outstanding advantages of this equipment are its simple structure, convenient operation, reliable quality, recyclable drilling tools and long service life. In the operation steps, the overload drilling system consists of DTH hammer, eccentric reaming and pilot drill bit, guide device and casing. The drill bit with the eccentric reaming design can rotate outward to drill a larger hole while allowing the steel casing to enter the hole smoothly. The cuttings are discharged out of the hole through the casing pipe.
When drilling to a specific depth, the reamer can be retracted by slightly counter - rotating or pulling the tool, at which point the drill tool can be safely pulled out. Next, the casing is pulled up and the bottom of the hole is filled with concrete or other material to complete the hole opening. DTH drill bits can then drill to the required depth. This series of operating procedures reflects the efficiency and practicality of the Odex hammer, making it the preferred equipment for drilling in the above-mentioned projects.
Machine Pictures
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.