Used Caterpillar 320DL Middle Size Excavator 20ton Weight C6.4ACERT Engine Great Condition

Generalization of our product

This used CAT 320DL excavator is in good condition and well maintained by our workers. We

assure that they can put into work immediately without any procedures. The parameters include

rated power,maximum excavation depth,driving speed are listed in following chart,you can take

them for reference. Besides, all the component and accessories are original version.

You are welcome to visit our company to select your excavator.

Display of components in this used CAT320D2L crawler excavator

Our company guarantee all the components in it are original without any modification and

quality problems. Besides, we have a professional machinery team which take charge of

maintenance to these used short working hours excavators to keep their performance and

durability.

Product specification

If you have interest and want to get more information about this used CAT 320DL hydraulic

excavator, you can contact with our staff.

Product maintenance

Such a large used excavator is definitely a complex machines. But maintaining them doesn’t

have to be. Follow the steps in your Operation and Maintenance Manual, stick to a routine

maintenance schedule and perform a thorough walkaround inspection on used excavators.

1. undercarriage

The undercarriage problems of the used crawler excavator can account for more than half of

your maintenance costs. It’s not just the most expensive part of your excavator — it’s also

exposed to near-constant wear and stress. Clean out any dirt and debris collected during a

shift to help prevent buildup that could accelerate wear. (It can also hurt fuel economy by

adding extra weight.) And perform a thorough inspection every shift to look for missing or

damaged components or uneven or excess wear.

2. tracks

Make sure your used hydraulic excavator’s tracks are set at the proper tension. They’ll wear

more quickly if they’re too tight or too loose. Chains and sprockets can also wear prematurely

if tracks aren’t maintained correctly. As you examine the tracks, keep an eye out for any wear

to the common track components - track shoes, pins, chains, idlers, sprockets and fasteners.

3. Filters

Filters keep your excavator’s engine, air, fuel and hydraulic systems running smoothly. Most

used track excavators come with an indicator that lets you know when filters need attention.

Act quickly when alerted to change filters to avoid the contamination that can lead to costly

damage and downtime.

4. water separator

If you leave your excavator outside overnight, condensation can cause water to build up in

the primary fuel filters. Used excavators come with water separators on these filters, and a

sensor inside the cab tells you when water has collected there. Drain it when indicated or it

can lead to corrosion and damage.

5. cooling system

Adequate airflow and coolant levels allow your used excavator excavator to run efficiently.

Both are especially important if you work in a very hot climate — you don’t want your machine

to overwork just to keep cool. Be sure to inspect coolant hoses for leaks. Also, apply low-pressure

water or air to clean the oil cooler, condenser and radiator. Reversing fans are a key feature

on these second hand excavators to help maintain a clean radiator.

6. Daily inspection

Your used excavator’s work tools do the work — so don’t overlook them in your daily inspection.

Check any attachments, including couplers, for cracks, excessive wear or signs of damage

that could hamper your productivity and safety. Using a bucket? Inspect it for cracks, bowing,

pin and bushing wear. Look for abnormal wear to the adapters, teeth, cutting edges, and side

cutters. And make sure all work tools are securely attached to the machine for safety.