Used Doosan DX500 crawler Excavator 238KW Rated Power Heavy Equipment

Used Doosan DX500 Crawler Excavator 238KW Rated Power Heavy Equipment

This used Doosan DX500 hydraulic excavator is made in 2020 and keeps good

performance no matter in any construction works. If you are looking for a large 

machine which is more than 45 tonnage with good quality,it can be your choice.

The hydraulic module of this used track excavator has been well maintained

If you are interested with this cheap but high quality used Doosan excavator,we

can provide more detail photos and videos to you.

You are welcome to inquire more information and details about this used Doosan large DX500

hydraulic excavator.

Product maintenance

This used middle size excavator is absolutely a complex construction machinery. However 

maintaining it isn't so complex. Follow following steps in your Operation and Maintenance

Manual, stick to a routinemaintenance schedule and perform a thorough walkaround

inspection on used excavators.

1. undercarriage

The undercarriage problems of the used crawler excavator can account for more than half of

your maintenance costs. It’s not just the most expensive part of your excavator — it’s also

exposed to near-constant wear and stress. Clean out any dirt and debris collected during a

shift to help prevent buildup that could accelerate wear. (It can also hurt fuel economy by

adding extra weight.) And perform a thorough inspection every shift to look for missing or

damaged components or uneven or excess wear.

2. tracks

Make sure your used hydraulic excavator’s tracks are set at the proper tension. They’ll wear

more quickly if they’re too tight or too loose. Chains and sprockets can also wear prematurely

if tracks aren’t maintained correctly. As you examine the tracks, keep an eye out for any wear

to the common track components - track shoes, pins, chains, idlers, sprockets and fasteners.

3. water separator

If you leave your excavator outside overnight, condensation can cause water to build up in

the primary fuel filters. Used excavators come with water separators on these filters, and a

sensor inside the cab tells you when water has collected there. Drain it when indicated or it

can lead to corrosion and damage.

4. Filters

Filters keep your excavator’s engine, air, fuel and hydraulic systems running smoothly. Most

used track excavators come with an indicator that lets you know when filters need attention.

Act quickly when alerted to change filters to avoid the contamination that can lead to costly

damage and downtime.

5. cooling system

Adequate airflow and coolant levels allow your used excavator excavator to run efficiently.

Both are especially important if you work in a very hot climate — you don’t want your machine

to overwork just to keep cool. Be sure to inspect coolant hoses for leaks. Also, apply low-pressure

water or air to clean the oil cooler, condenser and radiator. Reversing fans are a key feature

on these second hand excavators to help maintain a clean radiator.

6. The tools

Used excavator’s work tools do the work — so don’t overlook them in your daily inspection.

Check any attachments, including couplers, for cracks, excessive wear or signs of damage

that could hamper your productivity and safety. Using a bucket? Inspect it for cracks, bowing,

pin and bushing wear. Look for abnormal wear to the adapters, teeth, cutting edges, and side

cutters. And make sure all work tools are securely attached to the machine for safety.