Ironworker Hydraulic Press CNC Angle Steel Punching And Shearing Machine

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: Negotiable

Brand: Hoston

Product Description

CNC Angle Steel Punching and Shearing Machine Hydraulic Ironworker HIW-200

Model		HIW-60/D	HIW-90/S/D	HIW-120/S/D	HIW-160/S/D
Processing Capacity(KN)		600	900	1200	1600
Material Tensile Strength(Mpa)		≤450	≤450	≤450	≤450
Ram Stroke(mm)		80	80	80	80
Number of Stroke(times/min)(mm)		8-22	8-22	8-22	8-22
Throat Depth(mm)		300	355	400	600
Shear Angle		7°	8°	8°	8°
Flat Shearing	Max. Shearing Capacity (thickness*width)(mm)	16×250	20×330	25×330	30×355
Flat Shearing	Max. Shearing Capacity (thickness*width)(mm)	8×400	10×480	16×600	20×600
Profile Steel Shearing	Square Bar(mm)	40	45	50	55
	Round Bar(mm)	45	50	60	65
	C-channel(mm)	126	160	200	280
	I-beam(mm)	126	160	200	280
Angle Shearing	90° Shearing(mm)	120×10	140×12	160×14	180×16
Angle Shearing	90° Shearing(mm)	70×8	70×10	80×7	80×10
Hole Punching	Max. Punching Capaciy (diameter*thickness)(mm)	25×16	30×20	35×25	38×30
Motor		4	5.5	7.5	11
Dimension(mm)		1650×800×1780	1950×900×1930	2350×980×2100	2680×1060×2380

Standard Series:

Only one operator can work on this machine.

With one standard set of unit, including one pump, one motor and one valve.

Manual clamping

Without temperature cooling system

S series:

Only one opertaor can work on this machine.

With one standard set of unit, including one pump, one motor and one valve.

Manual clamping

Automatic clamping system in angle and plate shearing station

Temperature cooling system

D series:

Dual working ironworker(which means two operators can work on the machine at the same time)

With two sets of hydraulic units, including two pumps, two motors and two valves.

Automatic clamping system in angle and plate shearing station

Temperature colling system

Standard Functions:

Punching; Angle, C-channel Punching; H-beam Punching

Angle Shear; Round Bar Shear; Square Bar Shear; Flat-Bar Shear; Angle Miter Shear

Notching;

Optional Functions:

Pipe Notcing

Pipe Punching

Press Brake

Angle Bending

Radius Corners

Rounding off Corners

Bialateral Rounding off

Vee Nocthing

C-channel Jointing

I-Beam Shear

Channel Shear

	Punching Station A full range of punches and dies are available for various punchig needs. Quick change retaining nut system for fast punch tooling change. Thoughtfully designed stripper for visibility, safety andease of use. A large 2-piece table with scales and gauging stops isstandard on all models. Stripper with interchangeable plates of various openings to minimize deformation is standard on all models
Flat Bar Shearing Station Specially machined upper blade to give a clean shear with minimum distortion. Lower blade has four usable cutting edges. Variable degree miter-cutting on angle flange. Easily adiustable hold-down. Support table with guides for accurate positioning.
	Angle Shearing Station Single shear with no material loss and minimal deformation. 45° miter-cut is easy and clean. Stationary blades with four usable cutting edges. Selectable corner radii on moving blades for optimumresults on small or large angles
Bar Shearing Station One hold-down for various sizes of square bar shear-ing and round bar shearing. Optional channel and section bar shear tooling is available for most models.(See specification chart fordetails)
	Notching Station ldeal for notching of flat bars and angles. Electrically interlocked safety quard for maximumsafety and visibility. Gauging table included with stops for precise positioning.