LDX-026A Large Servo Feed Circular Saw Blade Grinding Machine
LDX-026A Large servo feed circular saw blade grinding machine
How to clean the grinding machine table:
1,Whether before or after using the grinding machine, we should check the grinding machine table for dirt. If there is dirt on the surface of the grinding machine, it must be removed.
2,Some large aluminum profile processing enterprises, on the issue of standardized operation of the saw blade, will require employees to check whether there is dirt on the surface of the saw blade.
3,When checking the surface of the saw blade, we should focus on whether there is dirt at the aperture, because once there is dirt at the aperture, it will affect the tightness of the flange, and even make the saw blade shake when working.
| Technical parameters: |
| Processing saw blade diameter range: ￠300- ￠ 1800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1800X1400X1800mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar domestic and foreign models, absorbs and analyzes the advantages of the same type, and makes some functional improvements. This equipment is specifically designed for grinding large alloy saw blades. |
| 1. Pre set multiple sets of tooth profiles for one click multifunctional operation. |
| 2. The flat teeth of the ladder can be completed in one go, with CNC grinding and any tooth shape, which can increase efficiency by three times; Improved gear extraction operation to improve accuracy and extend service life. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.