LDX-026A Lidexin Servo Full CNC Large Alloy Saw Blade Sharpener Machine
LDX-026A Lidexin servo full CNC large alloy saw blade sharpener machine
What is the difference between front Angle grinding and back Angle grinding of gear grinding machine:
1,Front Angle grinding function: you only need to enter the parameters of the grinding wheel (diameter and thickness) and the Angle required after the internal Angle grinding, as well as the number of teeth and the diameter of the saw blade of the grinding machine.
2,Put in the saw blade to start the device, the servo controller will establish coordinates according to the data you input, and complete the machining accurately. The accuracy is about 0.03mm.
3,Back Angle grinding function: Input data as simple as the front Angle input parameter method. The device can do the task you give it. A tooth can also be shifted in the back Angle grinding, and the grinding wheel is directly chamfered back and forth. It is also possible to turn two teeth at only one Angle to chamfer. Such a switch of functions can be completed with a single click on the human-machine interface.
| Technical parameters: |
| Processing saw blade diameter range: ￠300- ￠ 1800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1800X1400X1800mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar domestic and foreign models, absorbs and analyzes the advantages of the same type, and makes some functional improvements. This equipment is specifically designed for grinding large alloy saw blades. |
| 1. Pre set multiple sets of tooth profiles for one click multifunctional operation. |
| 2. The flat teeth of the ladder can be completed in one go, with CNC grinding and any tooth shape, which can increase efficiency by three times; Improved gear extraction operation to improve accuracy and extend service life. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.