LDX-020A Supply Left And Right Teeth Saw Blade Automatic Grinding Machine
LDX-020A Supply left and right teeth saw blade automatic grinding machine
What are the working principles of the saw blade grinding machine:
1,The utility model uses two synchronous motors to drive the grinding wheel main shaft and the workpiece main shaft respectively, and uses the hanging rotation; The invention relates to a numerical control method, that is, a pulse generator is mounted on a grinding wheel spindle, which sends out a pulse proportional to the rotation of the spindle. After the pulse is modulated by a numerical control system, the workpiece spindle is driven by a servo system and a servo motor, and a feedback signal generator is mounted on the workpiece spindle.
2,ndexing gear grinding: This type of gear grinding machine can be divided into three types according to the shape of the grinding wheel: butterfly grinding wheel type, large plane grinding wheel type and conical grinding wheel type. They all use the meshing principle of the rack and the gear, and use the grinding wheel instead of the rack to grind the gear.
3,The tooth profile of the rack is straight, the shape is simple, and it is easy to ensure the dressing accuracy of the grinding wheel. The cutting wheel rolls on the imaginary rack during processing. Finish grinding one or two tooth surfaces with each reciprocating roll. Therefore, it is necessary to grind the full tooth surface several times.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades and woodworking saw blades. It is easy to operate and can fully extend the service life of TCT saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.