Three Phase 380V Carbide Saw Blade Grinding Machine Manufacturer LDX-020A
LDX-020A Carbide saw blade Grinding machine manufacturer
Gear grinding machine gear grinding tutorial:
1,Start the machine so that the grinding wheel starts to rotate. Then, gently lean the gear against the grinding wheel and start rough grinding. This stage is mainly to remove unevenness and burrs on the gear surface.
2,During the rough grinding process, the progress of the gear should be checked regularly to ensure that the surface of the gear has become smooth and free of burrs.
3,Select the appropriate grinding wheel according to the material and size of the gear. Usually, for harder gears, softer grinding wheels are used to avoid excessive wear.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades and woodworking saw blades. It is easy to operate and can fully extend the service life of TCT saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.