LDX-028A Fully Enclosed CNC Servo Circular Saw Blade Head Side Double Grinding Machine
LDX-028A Fully enclosed CNC servo circular saw blade double grinding head side grinding machine
Operation process:
1,1 mode A
2,Manually set the knife, enter the number 5 on the left and right, that is, add 5 wires on the left and right, and there are 10 wires in total.
3,Mode A twice
4,Manually set the good knife, left feed 1, 21 (5) (10) The first knife grinds 5 wires, the second knife grinds a total of 10 wires, and the second knife is superimposed.
When the electrical system of the CNC circular saw gear grinding machine fails, the following steps can be followed:
1,First, understand the specific situation of the fault, including the fault symptom, occurrence time, working environment and other information. At the same time, check the relevant equipment manuals, circuit diagrams and other information in order to better understand the structure and working principle of the electrical system.
2,Before checking and repairing electrical faults, be sure to disconnect the power supply and take necessary safety measures, such as wearing insulating gloves and shoes, to prevent electric shock accidents.
3,Check the power cables, power switches, and power supply stability to ensure normal power supply. Use an appropriate test tool to measure the power supply voltage and current to see if there are any anomalies. Motor inspection: Check the power supply and wiring of the motor to confirm the normal operation of the motor. If the motor fails, check that the motor protection device is triggered and repair or replace the faulty motor.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
| An intuitive and simple whole Chinese operation interface is matched with a large-sized touch screen, so the equipment is easier to operate, and all preset procedures or self-compiled procedures are more convenient to call; the servo tool setting device features accurate positioning, so the product grinding accuracy is greatly ensured. Due to the adoption of high-quality and high-accuracy castings and machined parts, the service life of the equipment is greatly prolonged, and the equipment is simple and easy to operate and maintain; one person can operate many pieces of equipment at the same time, so the production efficiency is greatly improved, and the cost is reduced. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.