LDX-020A Automatic Alloy Saw Blade Front And Rear Angle Grinding Machine
LDX-020A Automatic Alloy Saw Blade Front And Rear Angle Grinding Machine Factory Direct Sales
Saw blade grinding the best method:
1,The use of a dedicated saw blade sharpening stone is the ideal choice for sharpening the saw blade. This grinding stone usually has a variety of particle sizes, and the appropriate particle size can be selected according to the material and use of the saw blade. The use of grinding stone to sharpen the saw blade can ensure that the surface of the saw blade is smooth and smooth, and improve the sawing efficiency.
2,During the grinding process, the grinding amount needs to be adjusted as required. If the amount of grinding is too large, it will lead to thinning of the saw blade and affect the service life. If the amount of grinding is too small, it will lead to the saw blade is not sharp enough, affecting the cutting effect.
3,Keep the water cool : During the grinding process, water is required for cooling. This can reduce the temperature of the saw blade surface and prevent thermal deformation and cracking. At the same time, it can also help remove impurities generated by grinding.
| Technical parameters: |
| Processing saw blade diameter range: ￠200- ￠1200mm |
| Saw blade aperture: ￠10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-110mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 800KG |
| Mechanical dimensions (length x width x height): 1600X1100X1800mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting TCT saw blades, woodworking saw blades, and large alloy saw blades. It is easy to operate and can fully extend the service life of alloy saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.