CoatTech Economy Automotive Pre-Preparation Station with Rear Extraction Plenum and Manual PVC Curtains for Dust Control
CoatTech Economy Automotive Pre-Preparation Station with Rear Extraction Plenum and Manual PVC Curtains for Dust Control
Introduction:
Designed for workshops requiring low investment and simple installation, similar to the 700A/800A series. This unit features a rear filtration cabinet and requires no ground excavation, making it perfect for quick setup. It effectively removes dust and exhaust gas during polishing and sanding processes.
Technical Specification Sheet
| Model | Inner Size (mm) | Outer Size (mm) | Total Airflow | Heating | Total Power | Application |
| CT-Prep A1 | 6300×3450×2700 | 7500×3600×3100 | 12,000 m³/h | None | 6.5 kW | Polishing / Sanding |
| System | Component | Description | Optional |
| Cabin System | Wall Panels | Rear Wall: EPS Insulation Panel (50mm); Front/Sides: PVC Manual Curtains | Electric Roll-up Curtains |
| Basement | None (Flat Floor Installation) | - | |
| Air System | Exhaust Fan | 1 unit × 5.5 kW Centrifugal Fan | - |
| Ducting | Standard: 3 Straight Ducts + 1 Elbow | Extended Ducting | |
| Filtration | Filter Media | Ceiling: EU5 High-Efficiency Filter; Rear: Fiberglass Paint-Stop Filter | - |
| Lighting | Ceiling Light | 24 Units × 16W LED Tubes | Side Lights |
| Control | Function | Fan On/Off, Lighting Control, Emergency Stop | - |
PVC Curtain Enclosure Unlike a fixed booth, the Prep Station uses sliding PVC curtains.
-
Convenience: Easily slide curtains open to move cars in and out quickly.
-
Visibility: Transparent windows allow the manager to monitor work progress.
-
Durability: Resistant to solvents and wear.
Energy Saving Strategy Don't turn on your 15kW Paint Booth just to spray a bumper with primer. Use the Prep Station (5.5kW) instead. It creates a cleaner environment than the open shop floor but costs a fraction of the price to operate.
Q: Can I spray the final topcoat (Color/Clear) in this Prep Station? A: Technically yes, but we do not recommend it for high-quality finishes. The Prep Station is not a sealed environment like a Spray Booth, so there is a higher risk of dust. It is best used for Primer and Putty.
Q: Does it need a metal base (basement)? A: No. The most popular model is the "Rear Draft" version. It sits on your existing flat concrete floor and sucks air out through a filter box on the back wall. This saves money on ramps and steel bases.
Q: Can you make a station for 3 cars at once? A: Yes, we can connect multiple units together (side-by-side) to create a multi-bay sanding line.
Q: Is the fan unit noisy? A: We use a dynamic balanced centrifugal fan with a belt drive, which keeps noise levels below 75dB.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.