Top-Grade Double Ball Rubber Joint Unparalleled Leak-Proof For Maximum Flow Control
Product Description:
Double Sphere Flexible Rubber Joint consists of outer rubber, inner rubber, framework layer, and reinforcing bar and flange. Relying on rubber’s special performances as long range elasticity, air impermeability, medium, climate and radiation resistance, rubber expansion couplings can reduce the vibration and noise of pipeline, and can be caused by the temperature change of heat bilges cold shrink compensation effect.
Technical Parameters:
| Diameter DN |
Length mm |
Axis displacement | Radial displacement |
Deflexion displacement |
||||||
| TYPE 1 | TYPE 2 | |||||||||
| mm | inch | Extension | Compression | Extension | Comgression | TYPE 1 | TYPE 2 | TYPE1 | TYPF 2 | |
| 32 | 11/4" | 165 | 30 | 50 | 45 | ±7.5° | ||||
| 40 | 11/2” | 165 | 30 | 50 | 45 | ±7.5° | ||||
| 50 | 2" | 165 | 30 | 50 | 45 | ±7.5° | ||||
| 65 | 21/2” | 175 | 30 | 50 | 45 | ±7.5° | ||||
| 80 | 3" | 175 | 30 | 50 | 45 | ±7.5° | ||||
| 100 | 4" | 225 | 35 | 50 | 45 | ±7.5° | ||||
| 125 | 5" | 225 | 35 | 50 | 45 | ±7.5° | ||||
| 150 | 6" | 225 | 35 | 50 | 45 | ±7.5° | ||||
| 200 | 8" | 325 | 35 | 60 | ||||||
| 250 | 10" | 325 | 35 | 60 | ||||||
| 300 | 12" | 325 | 35 | 60 | ||||||
| 350 | 14" | 325 | 35 | 60 | ||||||
| 400 | 16" | 400 | 40 | 60 | ||||||
| 450 | 18" | 400 | 65 | 70 | 70 | ±12° | ||||
| 500 | 20" | 400 | 65 | 70 | 70 | ±12° | ||||
| 600 | 24" | 400 | 70 | 75 | 75 | ±12° | ||||
| 700 | 28" | 400 | 70 | 75 | 75 | ±12° | ||||
| 800 | 32" | 450 | 70 | 75 | 75 | ±12° | ||||
| 900 | 36" | 450 | 70 | 75 | 75 | ±12° | ||||
| 1000 | 40" | 450 | 75 | 80 | 70 | ±12° | ||||
| 1200 | 48" | 500 | 75 | 80 | 70 | ±10° | ||||
| 1400 | 56" | 500 | 75 | 80 | 70 | ±10° | ||||
| 1600 | 64" | 500 | 75 | 80 | 70 | ±10° | ||||
| 1800 | 72" | 500 | 80 | 85 | 65 | ±10° | ||||
| 2000 | 80" | 550 | 80 | 85 | 65 | ±10° | ||||
| 2200 | 88" | 550 | 80 | 85 | 65 | ±10° | ||||
| 2400 | 96" | 550 | 80 | 85 | 65 | ±10° | ||||
| 2600 | 104" | 550 | 80 | 85 | 65 | ±10° | ||||
| 2800 | 112" | 550 | 80 | 85 | 65 | ±10° | ||||
| 3000 | 120" | 550 | 80 | 85 | 65 | ±10 | ||||
| • Special size and length can be customized for you. | ||||||||||
Applications:
Air Conditioning System
Air ducts, chemical lines
Circulating water lines
Compressor lines, paper stock lines
Pump-suction and discharge
Refrigeration lines
Turbine to condenser
Features:
Compared with mechanical expansion and packing vibration reduction, it occupies small space, light weight, easy to install and disassemble, saving labor and low cost.
For the same ultimate capacity, there is no need to increase the pump and pipe diameter, the inner wall is smooth, reduce the flow resistance, and will not damage the pipe body.
It has good watertightness and does not need to be padded during installation.
Wide range of application: Select different rubber formulations to make the product with heat resistance, oil resistance, corrosion resistance, aging resistance, wear resistance, ozone resistance and other properties.
Long service life: This product can generally be used indoors for more than 20 years.
Our Services:
- Installation Guidance - Detailed instructions to ensure correct and safe installation of the rubber joint into your piping system.
- Troubleshooting - Assistance in diagnosing and resolving any issues that may arise during the use of the product, including leaks or misalignment.
- Maintenance Recommendations - Guidelines on how to properly maintain the rubber joint to extend its lifespan and ensure optimal performance.
- Product Specifications - Comprehensive information about the product’s dimensions, material composition, pressure ratings, and temperature ranges.
- Performance Optimization - Tips on how to achieve the best performance from the rubber joint under various operating conditions.
Packing and Shipping:
Packing
Inner: Plastic film, then put into carton case.
Outer: Safe firmed export plywood case, marking on carton case and wooden case can be customized, or packing as per your requests.
Shipping:
1.We could deliver the goods by international express, such as DHL, UPS, TNT, EMS, others.
2.You could also choose the transportation according to your schedule and budget.3.Or you could use your own cargo agent.
FAQ:
Q1:Are you trading company or manufacturer?
A: We are professional manufacturer.
Q2:When the products will be shipped ?
A:Within 7~25 days after receiving the prepayment.
Q3: Can you make the product as per client's requirement?
A: Yes, We can customize according to customer requirements, and we have a professional technical team to draw drawings.
Q4: Do you accept small quantity order?
A: Of course we do.
Q5: Can you make the product as per client's requirement?
A: Yes, we can make it with your exact requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.