Corrosion Resistant Nickel Alloy Wires Inconel 600 For Mechanical Metallurgy Radio Chemical
Nickle Alloy Wires Inconel 600 Mechanical Metallurgy Radio Chemical
Nickle Alloy Wires products in coil form obtained by drawing from nickel and nickel alloy billets.
Categories: Nickel wire and nickel alloy wire. Pure nickel wires with varying impurity contents are used in industries such as radio, machinery, and chemicals for structural components. Nickel alloy wires include nickel-copper alloy wires, nickel-manganese alloy wires, nickel-silicon alloy wires, nickel-magnesium alloy wires, nickel-chromium alloy wires, nickel-aluminum alloy wires, and nickel-cobalt alloy wires.
Applications: They are used for corrosion-resistant parts, mesh materials, electronic vacuum devices, temperature measuring elements, etc., in industries such as radio, chemicals, machinery, and metallurgy.
INCONEL ALLOY 600 (UNS N06600 / W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The versatility of Inconel 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F (1095°C).
Available Product Forms:
Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire and extruded.
Rod, Bar, Wire and Forging Stock:
- ASTM B166 / ASME SB166 / ASTM B564 / ASME SB564
- AMS 5665 / AMS 5687
- BS 3075NA14 / 3076NA14
- DIN 17752 / DIN 17753 / DIN 17754
- ISO 9723 / 9724 / 9725
- MIL-DTL-23229
- QQ-W-390
Plate, Sheet and Strip:
- ASTM B168 / ASME SB168 / ASTM B906 / ASME SB906
- ASME Code Cases 1827 / N-253
- AMS 5540
- BS 3072NA14 / 3073NA14
- DIN 17750
- ISO 6208
- EN 10095
- MIL-DTL-23228
Pipe and Tube:
- ASTM B167 / ASME SB167 / ASTM B163 / ASME SB163 / ASTM B516 / ASME SB516 / ASTM B517 / ASME SB517 / ASTM B751 / ASME SB751 / ASTM B775 / ASME SB775 / ASTM B829 / ASME SB829
- ASME Code Cases 1827 / N-20 / N-253 / N-576
- SAE/AMS 5580
- DIN 17751
- ISO 6207
- MIL-DTL-23227
Other:
- ASTM B366 / ASME SB366
- DIN 17742
- ISO 4955A
- AFNOR NC15Fe
Chemical Composition:
| Element | Ni+Co | Cr | Fe | C | Mn | S | Si | Cu |
| Minimum(%) | 72 | 14 | 6 | - | - | - | - | - |
| Max(%) | - | 17 | 10 | 0.15 | 1 | 0.015 | 0.5 | 0.5 |
Physical Properties & Mechanical Properties:
| Physical Properties | |||
| Mean Coefficient of Thermal Expansion | |||
| Temperature Range | |||
| °F | °C | in/in°F | cm/cm°C |
| 68 | 20 | 5.8 x 10-6 | 10.4 x 10-6 |
| Mechanical Properties | |||
| Typical Values at 68°F(20°C) | |||
| Yield Strength 0.2% offset psi | Ultimate Tensile Strength (min.) psi | Elongation in 2"% | |
| 35,000 | 80,000 | 30 | |
Thermal Properties:
| Temperature | Coefficient of Expansiona | Electrical Resistivity | Thermal Conductivity | Specific Heat |
| °F | 10-6 in/in•°F | ohm•circ•mil/ft | Btu•in/ft2•h•°F | Btu/lb•°F |
| -250 | 6.0 | - | 86 | 0.073 |
| -200 | 6.3 | - | 89 | 0.079 |
| -100 | 6.7 | - | 93 | 0.090 |
| 70 | 5.8 | 620 | 103 | 0.106 |
| 200 | 7.4 | 625 | 109 | 0.111 |
| 400 | 7.7 | 634 | 121 | 0.116 |
| 600 | 7.9 | 644 | 133 | 0.121 |
| 800 | 8.1 | 644 | 145 | 0.126 |
| 1000 | 8.4 | 680 | 158 | 0.132 |
| 1200 | 8.6 | 680 | 172 | 0.140 |
| 1400 | 8.9 | 680 | 186 | 0.145 |
| 1600 | 9.1 | 686 | 200 | 0.149 |
| 1800 | 9.3 | 698 | - | - |
| 2000 | - | 704 | - | - |
| °C | μm/m•°C | μΩ•m | W/m•°C | J/kg•°C |
| -150 | 10.9 | - | 12.5 | 310 |
| -100 | 11.7 | - | 13.1 | 352 |
| -50 | 12.3 | - | 13.6 | 394 |
| 20 | 10.4 | 1.03 | 14.9 | 444 |
| 100 | 13.3 | 1.04 | 15.9 | 444 |
| 200 | 13.8 | 1.05 | 17.3 | 486 |
| 300 | 14.2 | 1.07 | 19.0 | 502 |
| 400 | 14.5 | 1.09 | 20.5 | 519 |
| 500 | 14.9 | 1.12 | 22.1 | 536 |
| 600 | 15.3 | 1.13 | 22.1 | 578 |
| 700 | 15.8 | 1.13 | 25.7 | 595 |
| 800 | 16.1 | 1.13 | 27.5 | 611 |
| 900 | 16.4 | 1.15 | - | 628 |
Processing Flow Chart:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.