1 Inch Hot Dipped Galvanised Welded Mesh For Architectural / Building Facades

1 Inch Hot-Dipped Galvanized Welded Wire Mesh Architectural Uses Such As Building Facades

Welded wire mesh’s mat-like design and construction enables it to remain firmly in place even when holding heavy materials such as concrete. It works well in bending applications, as the mat is bent as a single unit instead of a series of pieces. This also minimizes the risk of misplacement. Welded wire mesh offers a cost-effective alternative, as it requires less reinforcement than when using steel bars.

Specification of 1 Inch Hot-Dipped Galvanized Welded Wire Mesh Architectural Uses Such As Building Facades

Hot dip galvanized welded mesh + PVC coating (Green 6005): 12.7 mm × 12.7 mm / wire diameter internal 0,.65 mm - coated 0.90 mm / roll height 100 cm / roll length 5 m.
Hot dip galvanized mesh (galvanized after welding): 12.7 mm × 12.7 mm / wire diameter 0.65 mm / roll height 50 cm / roll length 5 m.
Hot dip galvanized mesh (after weaving) + PVC coating (Green 6005): mesh 25 mm / wire diameter internal 0.80 mm - coated 1.00 mm / roll height 50 cm / roll length 10 m.
Hot dip galvanized mesh (galvanized after weaving): mesh 13 mm / wire diameter 0.70 mm / roll height 50 cm / roll length 10 m.
Technology info:

Diameter: 0.65 +/- 0.025 mm.
Zn-coating: min. 20 g/m2.
Tensile strength: 300-450 N/mm2.
Elongation: min. 15% .
Carbon: max . 0.10%.
Make-up: 150 kg coils with an internal dia. of +/- 270 mm and an external dia. of +/- 450 mm.

GI square wire mesh specification: