Low Carbon Steel Bar Grating Heavy Duty Non Silp Easy Install

Low Carbon Steel Bar Grating Heavy Duty Non Silp Easy Install

Press Locked Steel Grating – Common, Integral

Common type:

After the grooving of bearing bar, the cross bar press locked and molded.
Maximum machining height of common steel grating is 100 mm, the length of steel grating is less than 2000 mm.
The standard height of bearing bar: 20 mm to 170 mm.
The standard thickness of bearing bar: 2 mm, 3 mm, 4 mm, 5 mm.

Integral type

The bearing bar of integral steel grating has the same height as cross bar. The grooving depth is 1/2 of bearing bar.
The height of the steel grating is less than 100 mm. and the length usually less than 2000 mm.
The standard height of bearing bar: 20 mm to 100 mm.
The standard thickness of bearing bar: 2 mm, 3 mm, 5 mm.

Heavy duty steel grating

Heavy duty steel grating is bit by bearing bar and cross bar in the 1200 tons of pressure under the molding. It is suitable for high load bearing occasions.
The standard height of bearing bar: 80 mm to 200 mm.
The standard thickness of bearing bar: 8 mm, 10 mm, 12 mm.

Louver steel grating

The bearing bar of louver steel grating open the chute with 30° or 45°. The cross bar grooved and press locked.
The grating height is less than 100 mm.
The standard height of bearing bar: 30 mm to 100 mm.
The standard thickness of bearing bar: 2 mm, 3 mm.

Features of Low Carbon Steel Bar Grating Heavy Duty

Light weight. high bearing capability and high strength.
Non-silp. anti-corrosion.
Not easy to deform
Beautiful appearance.
Easy to install and remove.
Extended the lifespan.

Applications of Low Carbon Steel Bar Grating Heavy Duty

Large-scale shopping malls.
Construction industry.
Factories. subway stations.
Offshore drilling platforms.
Ships.
Terminals.
Other industrial and civil construction.

Specifications of Low Carbon Steel Bar Grating Heavy Duty