1000mm 8 Beams Blanking Safety Light Curtain 8m Range IP67 -30℃ Operation

Price Negotiable

Price: Negotiation

MOQ: 1

Delivery Time: 5 - 8 working days

Brand: JUTAI

Product Description

CL10-8L Infrared Safety Light Curtain Sensor with Blanking Function for industry Door

JUTAI IP67 CL10-8L Safety Light Curtain

Blanking Mode:

Installed inside the door gap. When the door closes normally, the light beams of the safety light curtain are sequentially blocked from top to bottom. This sequential blocking is recognized by the system as a normal door closing action. However, if an object passes below and blocks the light beam when the door is in the process of closing, it will trigger the door to open.

Normal Mode:

Installed on the inside and outside of the door. When the door is closed, the light beams are not passed through. In this mode, regardless of which light beam is blocked, the system will immediately output the door opening signal.

Advantages:

Model	CL10-8L
Technology	Active Infrared Sensor with Strong Light Resistance
Detection Range	Up to 8 meters
Response Time	Fast and reliable
Working Current	<20mA at DC12V
Working Voltage	DC12-24V
Output Methods	NO/NC and COM
Applications	High-speed doors, sectional doors, rolling doors, vertical closing telescopic doors, freight elevators
Protective Height	Max 800mm
Operating Temperature	-25 ~ +70℃
Protection Level	IP67
Shell Material	Aluminum alloy

Installation Guidelines for JUTAI IP67 CL10-8L Safety Light Curtain

Step 1: Prepare for Installation

Detach Covers: Gently remove the top and bottom covers of the sensor.
Wire Connections: Make the necessary wire connections and thread the end through the designated port.

Step 2: Determine Installation Position

Alignment: Align the transmitter and receiver in parallel to find the exact installation spot.
Marking: Precisely mark the hole positions on the wall for accurate drilling.

Step 3: Drill and Secure

Step 4: Mount Components and Adjust

Mounting: Attach the transmitter and receiver to the wall using M3*25 screws.
Power Connection: Connect the power supply and test the alignment of the sensor.
Adjustment: If required, adjust the angle by rotating the aluminum tube. Once aligned properly, tighten the rotating screw firmly.

Step 5: Finalize Installation and Test