Small Mobile Hammer Crusher Mini Stone Crusher Machine With Conveyor

Hammer crusher applicable materials:
Construction waste: bricks, concrete, stones, etc.
Ore: iron ore, copper ore, bauxite, gangue, pebbles, etc.
Coal: various types of coal, such as anthracite, bituminous coal, coal, etc.
Stone: granite, sandstone, silica,limestone, shale, etc.
Chemical raw materials: gypsum, fluorite, salt, etc.

Working principle of hammer crusher:
Feeding: The material is fed into the crushing chamber of the crusher through a feeding device (such as a vibrating feeder).
Crushing: The motor drives the rotor to rotate, and the hammer of the rotor moves at high speed. The material is quickly crushed under the impact of the hammer.
Screening: The crushed material will pass through the screen, and the smaller particles will fall from the screen holes to reach the required discharge particle size; the larger particles will continue to be hit by the hammer until they are broken.
Discharging: The crushed material is discharged through the discharge port to complete the crushing process.
Structural composition

Composition:
Casing: The casing is the outer frame of the crusher and carries all the internal components.
Hammer: The hammer is a cast part on the rotor, usually made of high manganese steel, with good wear resistance, and crushes the material by high-speed rotation.
Rotor: The rotor is the core part of the crusher, equipped with multiple hammers, responsible for the crushing of the material.
Screen: The screen is used to control the discharge particle size of the material, and the screen aperture can be replaced as needed.
Motor: Provides power to drive the rotor to rotate.
Feed port: The part used to feed the material into the crusher, usually equipped with a feeding device.
Discharge port: The discharge channel for the material after crushing.
Bearing: Supports the rotor to ensure its normal rotation, usually using rolling bearings.
Lubrication system: Ensures lubrication between the moving parts to reduce wear and heat.
Safety device: Including overload protection device to prevent equipment damage.

Hammer curhser specification: