3.5-inch 320X480, ST7796 driver parallel port capacitive touch display screen,segment lcd display,segment lcd
Price:
Prices are set based on design and quantity.
MOQ:
First purchase, no purchase quantity limit.
Delivery Time:
4~6 Working Days
Brand:
ORIENTRONIC
Product Description
The size of the 3.5-inch TFT module
Definition of the module interface for the 3.5-inch TFT module
| Pin Number | Pin Name | Function Description |
| 1 | VCC | Positive power supply 3.3V |
| 2 | GND | Power ground pin |
| 3 | BLK | Backlight control switch. The backlight is enabled by default and turned off with a low level |
| 4 | RES | LCD reset for the display section |
| 5 | CS | LCD select signal for the display section, valid with a low level |
| 6 | WR | LCD data/command selection pin for the display section |
| 7 | RD | Serial port write control pin |
| 8 | R0 | Serial port read control pin |
| 9-16 | D0-D7 | 8-bit data line |
| 17 | CRES | Reset pin for the touch chip, the pin is connected to pin 4 (RES) through a 0-ohm resistor R7 by default: select one of them; simultaneous reset is sufficient |
| 18 | CINT | Touch interrupt |
| 19 | CSCL | IIC communication clock for the touch section |
| 20 | CSDA | IIC communication data line for the touch section |
The corresponding screen for the 3.5-inch TFT module
The structural drawing of the 3.5-inch TFT module
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Orientronic Display Electronic Co., Ltd.
Location
Honghu Industrial Park, Shajing Street, Bao'an District, Shenzhen City, Guangdong Province
Contact Person
li