Custom Negative Transmissive Segmented LCD Display – RoHS & REACH Compliant,segment lcd display,segment lcd

To provide an accurate quotation and design, please specify the following details:

1. Dimensions

• Large LCD panel: length and width (mm)

• Small LCD panel: length and width (mm) (if applicable)

2. Display Mode

• Positive display – e.g. white background with black characters, yellow‑green background with black characters, or grey background with blue characters.

• Negative display – e.g. blue background with white characters, or black background with white characters.

3. Polarizer Type

• Transmissive – requires a backlight to be visible.

• Transflective – can be used with or without a backlight (backlight optional).

• Reflective – no backlight; relies on ambient light.

4. Operating Voltage
Typically between 3V and 5V (custom voltages available upon request).

5. Operating Temperature
Choose from the following ranges:

• 0°C ~ +50°C (standard)

• -10°C ~ +60°C

• -20°C ~ +70°C (wide temperature)

• -30°C ~ +80°C (ultra‑wide temperature)

6. Viewing Direction
Specify the preferred viewing angle (clock‑face notation):

• 6 o'clock – viewed from below

• 12 o'clock – viewed from above

• 3 o'clock – viewed from the right

• 9 o'clock – viewed from the left

7. Connection Method
Select one of the following:

• Heat‑seal connector (heat‑seal pin)

• Zebra connector (elastomeric / conductive rubber strip)

• Metal pins (pin header)

8. Driving Method
Please provide the duty cycle and bias ratio, e.g. 1/4 duty, 1/3 bias.
(These parameters are determined by the customer’s driver IC and specific requirements.)