Chemical Factory 500L/H Single-Stage Reverse Osmosis

• Water output 500L/H, desalination rate 95%~99%, applicable to electronics, pharmaceutical, food and other industries. Adopt high quality RO membrane, and equipped with high efficiency high pressure pump, automatic control (PLC/microcomputer) and pre-treatment (multi-media + activated carbon + softened water filtration) to ensure pure water quality (conductivity ≤ 10μS/cm).
• Integrated design, energy-saving optional, support UV / ozone sterilization.
• Technical parameters: working pressure 0.4-1.6MPa, size is 1200×800×1900mm.

1. System Overview

The 500L single-stage reverse osmosis (RO) system is a high-efficiency water treatment system mainly used to remove dissolved salts, organics, bacteria, and other impurities in water, with a water production capacity of 500 liters/hour (about 0.5 tons/hour). The system adopts single-stage reverse osmosis technology, which realizes the separation of pure water and dirty water through RO membrane by pressurizing raw water with high-pressure pump. 

2. Main Features 

• High-efficiency Desalination Rate: adopting high-quality RO membrane, the desalination rate can be up to 95%~99%, which effectively removes ions, colloids and microorganisms from water.
• Energy-saving Design: equipped with high-efficiency high-pressure pump and energy recovery device (optional) to reduce operating energy consumption.
• Automatic Control: automatic start/stop, flushing and fault alarm function, easy to operate.
• Integrated Structure: pre-treatment, RO mainframe, post-treatment unit integrated design for easy maintenance.
• Stable Water Quality: built-in UV sterilization or ozone device (optional), to ensure that the produced water meets the standard of pure water (conductivity ≤ 10μS/cm).

3. Technical Specifications (500L/H model) 

• Water Output: 500L/H 
• Inlet Water Requirements: municipal tap water or groundwater, TDS ≤ 1000ppm, pH 3~10 
• Working Pressure: 0.4~1.6MPa 
• Power Supply: 220V, 380V/50Hz (or customized) 
• Pre-treatment: Multi-media Filter, Activated Carbon Filter, 5μm Precision Filter

4. System Structure

• Pre-treatment Unit: remove suspended solids, residual chlorine and organic matter, protect RO membrane.
• High-pressure Pump: provide the working pressure required by RO membrane
• RO Membrane Group: single-stage configuration, 1~2 membrane elements in series or parallel, core desalination components.
• Cleaning Device: chemical cleaning interface, regular maintenance of membrane flux.
• Electric Control Box: integrated pressure gauge, flow meter, conductivity meter and other monitoring instruments.